Hi, I have just purchased a D34010WYKH NUC BIOS V21, with 4GB crucial supported RAM and a 120GB SSD drive. Operating system Windows 8.1.
I bought this set up to run a weather monitoring system which down loads data from a logger, processes the data and transfers it to a website.
I thought this NUC unit would be ideal for my application, adequate processing power and small in size.
But I have a problem.
The unit loaded well and will run for several hours (18) connected to the data logger and processing data but when I try to connect to my home network it locks up and crashes.
I have no internal wifi card just 2 different makes of USB wifi adapter. If either of these is plugged in to the NUC, I get 5 mins? of WiFi linkage and then a black screen and no further life from the unit.
De-powering and re-powering the unit will bring up a windows repair screen but it cant repair the 'damage'.
I removed the USB adaptors and reloaded my software, all worked once again, until I plugged in a network cable to the Gigabyte port. Almost instant black screen and lock up.
The only solution is to reload the operating system.
I have tried upping the bios from version 21 to 24 but it just the same.
Anyone else had such a problem and found a solution? Maybe I should have bought a larger unit!