Hey,
some days ago I finally got my Intel NUC DN2820FYKH. I put a Kingston KVR16LS11S6/2 in it which should be compatible according to this document: CMTL > Search > Tested Motherboard
But my NUC does exactly nothing. I only got a black screen, my keyboard didn't work (it was also not possible to turn num lock on) and the power led is just on. To look if my NUC is broken I removed the Kingston memory. Then I got a blink code that there is a problem with the memory. So my NUC must be working basically?
Anyways, I put the memory back in. Because I have no HDD in I should get a prompt that there is nothing to boot from. But I only get a black screen. I tried different TV's and screens, also different HDMI cables but I only get a black screen, no prompt or anything.
This problem should be solved with a BIOS update to the latest version. I read a lot about that and downloaded the latest .BIO file, put it on an empty USB flash drive, removed the BIOS jumper from the mainboard and hoped that the BIOS update will work. But again, nothing happened. No blinking power led and so no BIOS update. I even tried four different USB sticks and also formatted in FAT, FAT32 or NTFS but nothing worked.
Now, after 4 days of trying and searching I still haven't found any way to get my NUC working. And I also have no second memory or any possibility to test my memory if it is working. But my NUC doesn't blink when turning on so my memory must work?
It also seems to be a bit odd that a USB LED keyboard does nothing when turning the NUC on. When I put it on my normal computer, it lights up. But not on my NUC...
So is there any way I haven't found already? No BIOS update is working with my USB flash drives, no keyboard is working and I only get a black screen, no matter which HDMI cable or screen I use. It's just on and does nothing. Sometimes, when I have a keyboard or USB flash drive on my NUC and turn it on it just turns off again after some seconds. Then, after some more seconds it turns on again...
I hope you can help me with that!