Let me start off by saying im really happy with this little device, however there seems to be a little annoyance with the BIOS.
My NUC is running ubuntu, hooked up to my sony hdtv with a minihdmi to hdmi cable and running with a wireless usb keyboard.
When trying to enter the bios (v0033) i just got a black screen. Not a dead black screen, the tv received a signal just didnt display anything. After googling around i ended up here and i saw many ppl with similar problems so started following the steps.
Hooked the nuc up to a regular pc display with minihdmi to dvi. Nothing
Hooked the nuc up to a regulat pc display with minidp to vga. Nothing
Replaced the wireless keyboard by a regular wired keyboard. Nothing
Moved the bios jumper on the the board. Nothing
Removed the bios jumper on the board. Nothing
So then i got slightly annoyed and downloaded the oldest bios version on your website, put it on a usb stick and ran bios recovery. It installed bios v0018, booted up and got into the bios had a nice screen and everything. So then i figured i might aswell download a few more versions and upgrade till i come across the latest one that works. But turned out i couldnt upgrade the bios using the regular way (F7) so i always had to put the version i wanted on a usb stick and upgrade it using the recovery mode. To keep a very long story long (cause lets face it it aint gonna get short anymore at this point), i tried using, 0018 0025 0028 0030 and 0033 the latest working BIOS version for me was BIOS Version 0025 - WYLPT10H.86A.0025.2014.0303.1008
Now i dont really like running an older bios version then i had before but on the other hand id like to be able to enter my bios when i need to... Reason why i wanted to enter it was to use the Wake On Lan option but since when i entered the v0025 one it seemed it was on the correct setting standard so im hoping it will be the same with the v0033. Im just putting this down here hoping you guys will come up with a fix for this at some point.