I've just purchased this kit and fitted it with a Wifi/BT card, 60GB Toshiba mSATA SSD, and 16GB (2x8GB) Corsair Vengeance 1866Mhz DDR3 1.35v RAM. Unfortunately, I receive the 'memory' error (power light flashing three times and no display) when turning the PC on whenever a RAM stick is inserted into the lower slot.
I've tried using both sticks of RAM individually in the upper slot, leaving the lower slot empty, and the PC boots fine and runs Windows. So I know both sticks of RAM are good, and compatible with the NUC board.
But if I fit both sticks of RAM, or if I just fit a stick to the lower socket, the PC fails to power up and the power light flashes three times repeatedly. I've tried switching them around and I've ensured that the lower stick is firmly and correctly in position, but I get the same result every time.
Is there anything else I can try or should I return the NUC to the retailer for a replacement?