Hello
I cant get my dn2820fykh to recover the bios, i have succesfully recovered the bios 3 times befor on this nuc but now it simply won this time.
I have a problem that when legacy bios is activated with bios 0021, 0025 or 0028 i lose the hdmi signal, so when you released your latest bios (0028)
i was hopeful the the legacy problem was solved..but it was not. I tried to recover to bios 0015 (the only one where hdmi work on legacy bios but wont boot on usb) as i had done previosly after testing the other bios versions but i cant get it boot from the usb stick, i have tried several usb sticks but nothing.
The bios update to 0028 was successful otherwise, it booted in to my uefi win 8 installation fine but when i changed to legacy mode the problem started (Trying to install openelec)
I cant see whats going on since the hdmi output doesint seem to send a signal since i am in legacy mode.
It doesint work to press F9 enter and the F10 to save so uefi gets activated.
The computer is working since it reboots when i press ctrl alt delete but it wont boot into recovery, disconnected the power and removed the yellow jumper and used a fat32 formated usb stick with a bios file (0015.BIO)
What should i do?
Message was edited by: joslse