Temperamental video out on D54250WYK
I have just received a D54250WYK and am having a lot of frustrations because I am getting no monitor signal at all about 90% of the time. I assembled it with 8G of 1.35v Gskill RAM, a 256GB Adata SSD...
View ArticleRemote Controller for D54250WYK
Hi everyone. Is there any informations about remote controller for D54250HYK? -----------I'm looking for a "Remote Controller" which can be as below. - Use with D54250WYK's Integerated CIR Port -...
View ArticleDC3217IYE Keeps Crashing
I have a fresh install of Windows 7 64-bit. The NUC has a 16GB of memory and a 256GB SSD card.I downloaded the newest driver pack from Intel and applied them.I have amulet devices remote control driver...
View ArticleHDMI problem
My D54250WYK NUC is connected to my monitor via miniHDMI to HDMI cable. The monitor is a Dell U2410.When I shut down (or sleep) the NUC the monitordoesn’t go to ‘Active-off Mode’ (Power Indicator still...
View ArticleD34010WYK - SATA HDD
Hi all, I have a question. Can I connect 2.5" SATA HDD to Intel NUC Kit D34010WYK ? I noticed that the motherboard is led SATA data and power connector.
View ArticleNUC HTPC Sound issues
Hello everyone, Really hoping you can help. I have recently purchased an Intel NUC system (i3, dual HDMI) and while I love the form factor and design I am having issues using this as a HTPC. The...
View ArticleD54250WYK cannot boot on network after Bios Update
Hello everyone, I just received the D54250WYK and installed Windows 8.1 by chainloading IPXE from my TFTP and DHCP server with a custom version of WinPE. Everything was great until I updated the BIOS...
View Articlecant longer see real time monitoring data on my new nuc d54250wyk
Hey.i cant no longer see fan speeds , temperatures and thresholds in reakl time monitoring , i hvae updatet to the latest bios. is there a selution for my problem?
View Articlecant longer see real time monitoring data on my new nuc d54250wyk
Hey.i cant no longer see fan speeds , temperatures and thresholds in reakl time monitoring , i hvae updatet to the latest bios.is there a selution for my problem?
View ArticleAdata brand SSD Failures
I have a DC3217IYE with 8gb Ram, Win8.0x64, and an Adata SSD model SX300 from Newegg.The unit was build in Feb 2013 and the 1st SSD failed in Sept. Adata sent a replacement which recently failed. I...
View ArticleIntel NUC Video Driver Issue
My "HYE" ( I5) works well Win64 Ultimate, Win 2008R2, and Win 8.1 EXCEPT that in 8.1 and R2 it will not reboot if the latest Intel Vid Driver is installed. My work around is to reboot safe mode and...
View ArticleD54250WYK WIFI stops after a few min. Help!
I just got a D54250WYK -haswell I5 with 8Gb Crucial Mem, Intel 240Gb 530SSD, Centrino 6235AN wifi.I put on Win7 enterprise and have loaded all the latest drivers for the NUC. My sypmtom: I connect...
View ArticleD34010WYK does neither boot from USB 3.0 nor boots with plugged USB 3.0 drive
I have a new D34010WYK and I want to install Fedora from USB, but the nuc hangs when I'm trying to install from my Sandisk USB3.0 stick. A USB 2.0 stick was recognized properly. Same issue if I connect...
View Article'taller' Haswell NUC models and ETA?
Well it's now December (OK, just barely), do we have any more detail on the expected taller NUC models that will support a 2.5" drive? I'd really like to know what CPU flavours we'll see and when...
View ArticleMy D34010WYK is waking up immediately upon going to sleep due to the Intel...
I've had a problem where my NUC wakes up immediately upon being put to sleep. Using lastwake I found that it was the USB 3.0 eXtensible host controller that's waking me up... but I can't disable this...
View ArticleTemperamental video out on D54250WYK
I have just received a D54250WYK and am having a lot of frustrations because I am getting no monitor signal at all about 90% of the time. I assembled it with 8G of 1.35v Gskill RAM, a 256GB Adata SSD...
View ArticleD34010WYK USB 2.0 external storage device with 3 TB not recognized
I updated to BIOS 0022 I tried to add a USB drive to Ubuntu 13.10 on Nuc but I am getting the following error: [ 805.085919] usb 2-2.1: Manufacturer: Generic [ 805.085922] usb 2-2.1: SerialNumber:...
View ArticleNUC 4250u vt-d not working under Citrix XenServer
I can't enable GPU passtrough in XenServer. I receive the error message that my hardware doesnt support this. To be able to support this, vt-d is required.This is enabled in my bios (version 0021).In...
View ArticleNUC HTPC Sound issues
Hello everyone, Really hoping you can help. I have recently purchased an Intel NUC system (i3, dual HDMI) and while I love the form factor and design I am having issues using this as a HTPC. The...
View ArticleD34010WYK USB 3.0 devices do not work under Linux
I bought a D34010WYK and installed Debian 13.10 on it with Kernel 3.11. USB 2.0 devices work, but any USB 3.0 devices fail in the xhci driver that is responsible for USB 3.0. If required I can add some...
View Article