Remote control for the NUC
I have D54250WYK running win 8.1, what remote can use with that ?
View ArticleAudio/Graphics driver problem on D54250WYKH
Hi, I have an Intel NUC D54250WYKH and I am running Windows 8.1 and XBMC on it. I have a problem with the HD audio formats not working. I have checked this webpage to verify my audio settings:Windows...
View ArticleScreen powering off for 3 seconds
I occasionally (twice a day) and randomly, get my monitor to go dark for 3 seconds, then come back to life.Not sure if it has to do with the NUC or the graphics driver or if it is an issue with the...
View ArticleNUC DN2820FYKH: WARNING: Processor thermal trip at boot
Hello, When I start my brand new NUC, at startup I have almost always this message: "WARNING: Processor thermal trip" I updated to the latest bios, revert bios settings to default (didn't touch before...
View ArticleClik here to view.
D3410WYK NUC - boot order set to default after power loss.
HI, I have D3410WYK with this configRam: 8 GB KingsotnSSD: eSata 80 GB (SATA device 3)SSD: Intel 120 GB (SATA device 0) This SSD disks are NOT IN RAIDI install Win7 Pro on eSata driveAnd on Intel...
View ArticleDN2820FYKH USB BOOT
Hi, using this NUC with Bios 40 i am not able to boot any OS from USB.I tried openELEC and Ubunto, but the bios don't find any bootable device.I know there was an old bios version which works, but this...
View ArticleD54250WYK Windows 8.1 low memory error
Hi, I have the D54250WYK with Windows 8.1 and after leaving it on at the desktop doing nothing for a while, I'll get a low memory error.My setup is:Memory is Crucial Ballistix Sport 16GB...
View ArticleYoutube/netflix problems in windows 8.1, Unable to install chipset and...
My D34010WYK has actually had at least parts of this issue from the start (Netflix/youtube). After a while I got so tired so I installed open elec instead. Now I think its time to once and for all to...
View ArticleIntel® NUC DN2820FYKH - XBMC Gotham 13.2 running on Windows 8.1 - issues with...
Intel® NUC DN2820FYKH versus Intel® NUC Kit DCCP847DYEI tested two NUC units to give a good scenario comparisons in the hope that other owners of these two units could benefit from my findings. I would...
View ArticleDE3815TYKH will not power down
Hello, I running the DE3815TYKH NUC with Debian Wheezy and kernel 3.14 64bit. The Bios version is 034. If I push the power button the system is halted but will not switch off. So I have to push the...
View ArticleNo Boot and Video after fail Firmware Upgrade D54250WYK
Hello, I need some help. I have an D54250WYK and I've tried to upgrade the firmware to the latest version using the windows BIOS update tool. After restart the NUC never boot again and there is no...
View ArticleD54250WYK 'headless' issue?
So I just recently received one of these new machines. Overall I'm impressed but one thing I've noticed is that when no connected display is active - for example if the display port goes into a HDMI...
View ArticleI can't play any .cue files (wav, wav DTS, dca or flac)
I can't play any .cue files (wav, wav DTS, dca or flac) with Intels graphics/sound (HDMI) driver. If I use a generic Microsoft driver I can! Setup:NUC Kit D54250WYJ (CPU i3 - 8 GB ram - windows 7 sp1)...
View ArticleDN2820FYKH No bootable Device
Hello,my NUC seems to have a problem with booting from HDD. I was able to boot a OpenELEC Stick and install the OS but after a restart I get the "no bootable device" failure. I try to install a other...
View ArticleClik here to view.
Intel NUC DN2820FYK IR not working
Hi, I have a problem with my DN2820FYK.I don't get my Remote Harmony Touch on Openelec 4.0.3 to work. I already tried different templates like "Windows Meder Center", "Windows Media Center SE", "XBMC",...
View ArticleCan´t Remove Motherboard on Nuc D34010WYK
I have the Power button Bug and want to remove the Batterie Cable to reset Bios, but i can´t remove the Mainboard.There are two black Screws i took out, is that enough? Cant´t take out the board and i...
View ArticleD34010WYK issue with USB 3.0 HD
Hello,I have two problems since I bought my nuc.I use it with an external USB 3.0 western digital elements 1To disk.I installed latest Nuc versions software : bios version 28, USB 3.0 controller...
View ArticleD34010WYK does neither boot from USB 3.0 nor boots with plugged USB 3.0 drive
I have a new D34010WYK and I want to install Fedora from USB, but the nuc hangs when I'm trying to install from my Sandisk USB3.0 stick. A USB 2.0 stick was recognized properly. Same issue if I connect...
View ArticleD54250WYK fails to present HDMI output upon wakeup
Hi all, My D54250WYK fails to present HDMI output when started from other than powered off state.It happens with BIOS 026 and 027. This only occurs when my Pulse-Eight usb-cec adapter is connected.When...
View Articleis the i3 haswell nuc (D34010WYKH1 ) compatible with the intel 530 sata 120gb...
I've previously bought 3 nucs, (2 i5 haswell models and 1 i3 haswell model) that have been, and continue to work, flawlessly. In each of those, I have a 256gb samsung 840 pro SSD plugged in with this...
View Article