No video signal on my NUC D54250WYKH
I have a new NUC D54250WYKH. It is connected to my Acer v198w via an adapter that converts the NUC's HDMI mini jack to a standard VGA adapter out, which then connects to the VGA IN on my Acer monitor....
View ArticleCan`t access BIOS after Ubuntu 14.04 install
So, I finally desired to install Ubuntu 14.04 LTS on my NUC DN2820. And I put on Fast Boot in BIOS, and my Logitech K360 and M705 has a little problem, the NUC won`t detect the what I do.I`m using...
View ArticleD54250 blank screen during boot when using display port, works fine when os...
UPdated to latest Bios, same result
View ArticleNUC 340101wyk unable to use the USB 2.0 controller. Need to set USB to eHCI
I have a USB 2.0 eHCI device that is not compatible with a USB 3.0 xHCI controller. I have connected to the USB 2.0 connector on the board, but the device manager still shows that connector on the USB...
View ArticleNUC D54250WYKH "Ticking sound" when using hdmi to pre-amp - when there's no...
- it starts in a few seconds after pausing or stoping youtube or something else music/sound. Tick-tick every second. Bad or to small PSU? I'd try another hdmi cable. Didn't solve the problem.I'd try...
View ArticleD54250WYK 3D Playback Issues
Hello, I have been using my NUC as an HTPC for months but have not had any luck playing 3D content. The NUC does not seem to output a 3D signal or send a 3D signal to my television to tell it to switch...
View ArticleNUC DN2820 FYKH in combination with a Philips TV
I use the NUC DN2820FYKH in combination with a PhilipsTV and a harmony touch RC. The IR signal for on/off for both the Philips TV and the nuc is the same.So when I turn on my TV the NUC goes on as...
View Article[bug] DN2820FYKH will not resume from hibernation
Hello, I am using my DN2820FYKH as a media centre PC. It runs Windows 7HP (64bit) and DVBviewer Pro as media centre software. DVB-C TV reception is done via an external USB receiver.For scheduled TV...
View ArticleIntel NUC DN2820FYK IR not working
Hi, I have a problem with my DN2820FYK.I don't get my Remote Harmony Touch on Openelec 4.0.3 to work. I already tried different templates like "Windows Meder Center", "Windows Media Center SE", "XBMC",...
View ArticleNUC board schematic
Can you please post the schematic (pdf or Orcad format) for the Intel NUC board (D34010WYB)? Thank you.
View ArticleIntel NUC D54250WYK2 - Sound problem with hdmi
Hi I have a NUC 4250, and I've had it for a few days now. I use HDMI for picture and sound. There is nothing wrong with the picture, but the sound stops and starts with about 2-minute intervals. The...
View ArticleNUC D34010WYK won't turn on via Remote after installing BIOS Update...
After I've installed BIOS Update WYLPT10H.86A.0033, i'm no longer able to Power On my NUC (D34010WYK) with my Logitech Harmony Remote Control.Consumer Infrared is enabled in BIOS, and I can use the...
View ArticlePowerDVD 14 no longer plays non-Blu Ray files in 3D
Something has changed with the newest graphics driver. I have an Intel NUC D34010WYKH (BIOS 033) that I have hooked up to my 3D projector (BenQ W1070) via an HDMI 1.4 cable. Playing 3D blu-rays with...
View ArticleCan`t access BIOS after Ubuntu 14.04 install
So, I finally desired to install Ubuntu 14.04 LTS on my NUC DN2820. And I put on Fast Boot in BIOS, and my Logitech K360 and M705 has a little problem, the NUC won`t detect the what I do.I`m using...
View ArticleDN2820 ethernet
I have just received my DN2820, but I cannot get it to connect to the internet. It is plugged by ethernet to my router, which sees it but let it unconnected. I have updated the BIOS by uploading the...
View ArticleDN2820 blank screen from windows 8.1 boot onwards
Hi, I have DN2820 which has had intermittent video issues. It has windows 8.1 (fully patched). To combat the issues I: 1) installed the latest bios as of 1/2/20152) installed the latest drivers as of...
View ArticleNuc i5 Haswell (D54250WYK) Strange fan noise
Hi I've recently (for Christmas) bought the Nuc i5 Haswell (BOXD54250WYK), and after few weeks, the fan began to make some strange noise, like a trimmer running on low battery, or something like that...
View ArticleD54250WYKH no power light after hibernate, Ubuntu 14.04, latest BIOS
Purchased the NUC a couple of days back updated to the latest bios and installed Ubuntu 14.04.Everything worked fine including suspend, hibernate etc. Last night i put the machine on hibernate and...
View ArticleSound Sporadically Going Out While Watching Video
Hello fellow NUC users, I have the Intel NUC BOXD54250WYKH1 that I bought through Amazon in July. It works pretty perfectly except for one incredibly irritating issue I have. When watching videos,...
View Articleusb hub support?
hi, does the DN2820 support an usb 3.0 hub, powered by the board? Regards,Svenry
View Article