Distorted sound from analog jack on NUC5i7RYKH
Hi all, This one's got me stumped. I'm having an audio issue after migrating to a newer NUC. Let me preface this by saying yes I know what I did here isn't the preferred method for migrating. I've...
View ArticleNUC5I3RYH - video stuttering while streaming
I have recently bought a NUC5I3RYH system to be used as an htpc. The biggest disappointment was that after I updated the system to the latest bios, drivers and windows 10 os (as of 09/29/2015), the...
View ArticleHDMI Fails to handshake with monitor NUC5PPYH
I have had possession of 2 different NUC5PPYH boxes. Both have had very similar problems. I returned the first and still have the second.The problem is intermittent. My NUC will reboot without...
View ArticleNUC5i7RYH and problem usb keyboard logitech
I am usingNUC5i7RYHwithcertified hardware, RAMetcand just installedlastbios. when I usethe keyboardlogitechmouselogitechcordedeconomicandeverything is perfect if youusethe...
View ArticleNUC won't boot after suspend - must pull cmos battery
First D5425WYK wouldn't take an OS install (multiple linux flavors: legacy and UEIF, stock and latest BIOS, multiple disk drives as well). I had continual IO errors - after dozen of hours it was clear...
View ArticleDN2820FYK - no Display Scaling under Win7
Hi folks. I've just got a DN2820FYK, which after a bit of fuss I got Windows 7 Pro x64 running on. Problem is, my TV's default overscan setting means that a good part of the screen is not visible....
View ArticleNetwork connection problem with nuc5i5ryh
Hi everyone,I just bought a nuc5i5ryh.I installed a samsung ssd, some ram and windows 7 pro.My problem is that that ethernet connexion does not work.I keep having the "not connected - no connections...
View ArticleNUC5i3RYK doesn't want to boot on my M2 SSD drive
Hi, I've got a NUC5i3RYK unit with 2x4GB DDR3L-1600 RAM and a M2 Transcend TS64GMTS800 SSD drive. I've installed on the SSD Drive a Windows 7 Pro without any problem. I've let the NUC on a table for a...
View ArticleCan you provide sample code for using Prog_LED# and WDTO#
Intel® NUC Board D54250WYB tech product spec says: "Prog_LED#: general purpose signal output that indicates when an event was triggered by the operating system. Signal is amplified by a transistor....
View ArticleDE3815TYBE Power ON Fail
Hi, I was with an issue during power on of the DE3815TYBE with v43 or v44 BIOS.Sometimes when I plug the power cord and press power button the power led turns on and after 2 seconds turns off. And the...
View ArticleProblem to connect wireless keyboard and mouse to the USB3 connections
HelloI have a problem connecting to the wireless keyboard and mouse to the USB3 connectionsDoes the problem is because of the need to connect to USB2? If so how to connect with a cable is recommended...
View ArticleNuc D54250WYK : 4 Nucs same problem! Hard Disk not recognized.
I got 4 Nuc D54250WYK, they suddenly don't recognize the hard disk (Sata) during the boot, just after the memory check. At this point you can only turn the computer off and try to turn it on again....
View ArticleClik here to view.
【NUC5i5RYH】about USB port issue
I wnat to know how manymA currentoutput with NUC5i5RYH USB power.WhenIcharge the (500AM input) mobile, it's need very long time.if the device need 1000AM input charging, it's no power to charge.How can...
View ArticleClik here to view.
[NUC5CPYH] BIOS/Windows doesn't recognize Intel M.2 7265NGW Wifi Card
Hello, I've tried two of these cards in this nuc since I thought the first one was defective but the bios doesn't recognize it and windows 7 x64 doesn't see it either. Bios says M.2 card not present...
View ArticleNUC5i3RY*: Bug in BIOS Version RYBDWi35.86A.0249.2015.0529.1640
Hi, I have a NUC5i3RYH with latest BIOS version and I've disabled the CIR receiver in BIOS setup. However, after resuming from S3 (hybrid standby and S4 are disabled in Win 8.1 Pro and Intel® Ready...
View ArticleNUC5I3RYH: Win 8.1 x64 crashes after entering sleep mode
I have been seeing this issue since updating to latest BIOS Version 0350 - RYBDWi35.86A.0350.2015.0812.1722 and/or the latest graphics and/or bluetooth and/or wireless drivers. Following happens...
View ArticleNUC5i3RYH - USB problems
USB ports on the backside of my brand new NUC5i3RYH don´t recognize any USB-devices.I installed a 128GB SSD drive (M.2) and 8GB RAM. First, i installed the UBUNTU Version 14.04 on the SSD and...
View ArticleNUC5i5RYH HDMI stopped working
So appearently my NUC suddenly decided that it won't output over HDMI anymore. My half a year old NUC which i'm running as a media center worked fine until now. I turned it on as usual but the screen...
View ArticleAnyone getting this Bluetooth error with the new driver? (NUC5PPYH)
BT_Win10_64_17.1.1529.1620.exe seems to work fine. But with Wireless_Win10_64_18.12.4.exe - I get this error: "This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE" If I reinstall the...
View ArticleIntel Wireless driver issue (18.12.4) - NUC5i5RYH
Hi, I do have a new Intel NUC5i5RYH running on Windows 10 Pro. When I download the latest wireless driver Win10_64_18.12.4.exe I cannot even start the setup. It just happens nothing.Anyone else with...
View Article