NUC 2820: cannot identify wifi
Hello, I just installed win 8.1 64, updated bios (25) and all drivers. Bluetooth seems to be detected but not the WiFi. Could you please advise? Regards,diodorus
View ArticleWhy won't Bitlocker work on NUC D34010WYK when it has TPM v2.0?
When attempting to enable Bitlocker on a NUC D34010WYK, I receive the following error message: "The Trusted Platform Module (TPM) on this computer doesn't work with the current BIOS. Contact the...
View ArticleFlickering video with D34010WYK using Windows 7 Media Center
I am using Win 7 64 bit with 8 gb memory and a 40 in Samsung TV. When I view either live TV or recorded TV through Windows Media Center, I notice flickering with bright scenes. I don't see it with...
View ArticleF2 Entering BIOS
I can allways replicate F2 not working and also F2 that does work.NOTE: I am using HDMI port, not DP (dont know hot this is on DP, since I dont have DP-HDMI conversion cable). In my workplace I have...
View ArticleClik here to view.
DN2820FYK - no Display Scaling under Win7
Hi folks. I've just got a DN2820FYK, which after a bit of fuss I got Windows 7 Pro x64 running on. Problem is, my TV's default overscan setting means that a good part of the screen is not visible....
View ArticleHaswell NUCs and Remotes
Has anyone got the Haswell NUCs working with the XBox 360 Media remotes?They are supposed to be MCE compatible. But nothing happens when I press the buttons in the remote. I am using the Xbox 360 Media...
View ArticleNuc does not start
Hi- I just purchased a new NUC (DN2820FYKH), ajd it would not start. It is equipped with 8gb of ram and a 120gb SSD disk. I am in the process of testing these separately, but it seems unlikely to be...
View ArticleD54250WYK 'headless' issue?
So I just recently received one of these new machines. Overall I'm impressed but one thing I've noticed is that when no connected display is active - for example if the display port goes into a HDMI...
View ArticleNUC (DN2820FYKH DONT POST BIOS
I just purchased a new NUC (DN2820FYKH), ajd it would not start. The setup is this 60GB Kingston SSDNow V300, 2.5" SSD, MLC-Flash, Read 450MB/s, Write 450MB/s4GB Corsair Value Select DDR3 SO-DIMM...
View ArticleHaswell NUC CIR receiver (ACPI issue?)
The D54250WYK infrared receiver is not working out of the box in Linux. I have been testing this in 64bit Ubuntu 13.10 and OpenELEC 3.2.3. The following lines can be found in dmesg:[0.168692] pnp...
View ArticleD54250WYKH Internal USB connections?
How can I locate the two internal USB 2.0 header(s) and what iks the best way to being them out for external connection? thanks Keith
View ArticleD3410WYK no driver available for infrared
I have an I3 Haswell D3410WYK with Windows 8.1. My device manager says "Your infrared receiver has stopped working properly because a compatible driver isn't available for this version of Windows." I...
View ArticleMemory issue D54250WYK
Hi,I have been struggling for some days to get my D54250WYK stable. At very first I got the 3 blink memory error, but after reseating the memory modules, disconnected the battery for 2h and updating...
View ArticleNUC will not boot. Blue LED for 0.5s then off for 3s and repeat.
Hi All I have a DC53427HYE with 16GB RAM and a Plextor mSATA 6G-128GB SSD I've been running Debian amd64 successfully on my NUC for a couple of months and love it. I added a Gbps USB3 NIC and it sits...
View ArticleD54250WYK Rear USB problem
Recently my 2 rear usb3 don't work.Juste my front usb3 work.... When i go to the bios, this is the same problem, i have only 2 front usb Work !!! I try many usb key or usb drive or usb hardrive...I use...
View ArticleNUC Haswell reboots after shutdown
If I chose shut-down it turns off but starts again. How so fix? Ubuntu 13.10. NUC Haswell BIOS version: 0022 (same with 0018). I just found this: Re: D54250WYK Shutdown Rebootsbut the asker didn't...
View ArticleWindows app for accessing BIOS parameters such as temperature
Can someone please point me to a link for such a thing. I have Googled and followed links to Intel Desktop Utilities but each time I reach a dead end or the wrong product
View ArticleDC3217IYE - 2nd HDMI suddenly stopped working
Since I bought my NUC, I always had both HDMI outputs connected where the 1st output was/is connected with my TV and the 2nd one with my AV receiver. After this worked for more than a year without...
View ArticleClik here to view.
DN2820FYK - no Display Scaling under Win7
Hi folks. I've just got a DN2820FYK, which after a bit of fuss I got Windows 7 Pro x64 running on. Problem is, my TV's default overscan setting means that a good part of the screen is not visible....
View ArticleApparent BIOS update failure on D34010WYK
I just tried to update my brand new D34010WYK with the latest BIOS (WYLPT10H.86A v0024) via the updater for Windows. I got the prompt to reboot, which I did ... and this never booted again. I get no...
View Article