NUC Haswell reboots after shutdown
If I chose shut-down it turns off but starts again. How so fix? Ubuntu 13.10. NUC Haswell BIOS version: 0022 (same with 0018). I just found this: Re: D54250WYK Shutdown Rebootsbut the asker didn't...
View ArticleNUC internal power connector
How does the internal power connector of the Intel NUC D54250WYK work? When I connect the external power supply I measure 19V over the two pins of the internal power supply connector.When I disconnect...
View ArticleClik here to view.
SATA cables for DN2820FYB and DE3815TYBE?
Does anyone know where you can purchase (pref EU) SATA cables for these new boards with the small 4 pin power socket?
View ArticleLogitech K400 keyboard laggy and jumpy on my i3 NUC
Hello, I received my Intel® NUC Kit D34010WYK a few days ago and I can't get my wireless Logitech K400 Keyboard/mouse to work well. There is a huge lag when using the mouse pad, and key presses are...
View ArticleD54250WYK Not powering on by MCE remote
I was having an issue powering on the NUC using the power button on top so following information on XBMC forum I removed the CMOS battery for 10 minutes to let the BIOS completely reset to defaults....
View ArticleHaswell NUC CIR receiver (ACPI issue?)
The D54250WYK infrared receiver is not working out of the box in Linux. I have been testing this in 64bit Ubuntu 13.10 and OpenELEC 3.2.3. The following lines can be found in dmesg:[0.168692] pnp...
View ArticleRemote boots one NUC, and not another
Hi there I'm having a really strange issue with my xbox 360 media remote. It can boot my dn2820 nuc, but NOT my d34010 i3 nuc. The remote DOES work when the OS has loaded, openelec in this case, for...
View ArticleD34010WYK crashes when HDMI is inactive
D34010WYK crashes when HDMI is inactive (unplugged, TV switches to another input or is turned off) Using Microsoft drivers for graphics stops the crash but the first issue with that is HDMI audio stops...
View ArticleDN2820FYKH doesn't react on USB keyboard or mouse input after resume
My (April 2014) Intel DN2820FYKH doesn't react on any input from my USB keyboard or mouse after resume. It runs Ubuntu 14.04 x64 and upgraded BIOS to 0032. This makes this device pretty useless.
View ArticleDN2820FYKH no USB mouse after sleep (under Debian 'Jessie')
I cannot use my mouse to unlock my screen after the computer has been sleeping. Instead, I have to use a long hold on the power button to power it down, then reboot. I have an April 2014 manufactured...
View ArticlePXE Boot
I'm testing an Intel NUC i5.It sends a DHCP request containing an identifier which is not the MAC address.Is there a way to configure it so that it sends the MAC address as part of the identifier? Thanks.
View ArticleClik here to view.
D54250WYK unexpected crashes/poweroffs
Hi all, 3 weeks ago I bought the NUC D54250WYK, with the following added HW:- Kingston 8GB RAM (model KVR16LS11/8 DDR3L CL11 , apparently certified for the NUC)- Intel mSATA SSD 530 series, 180 GB-...
View ArticleIntel NUC DN2820FYKH
HelloI bought the Intel NUC DN2820FYKH kit. I use Memory Crucial 4GB CT51264BF160BJ. When I turn on the computer, there are a few hits on the hard drive, but there is no output to the screen. The Kit...
View ArticleNUC internal power connector
How does the internal power connector of the Intel NUC D54250WYK work? When I connect the external power supply I measure 19V over the two pins of the internal power supply connector.When I disconnect...
View ArticleNUC kit D54250WYKH: video playback stuttering in Windows Photo Gallery...
Hi all, Just bought this kit and put it together with an 8gb SODIMM and 120gb SSD with Windows 7 Pro x64. Installed Windows Essentials 2012 Photo Gallery on it so that we can run a screen saver with...
View ArticleWhat are the USB 2.0 pinouts on a D34010WYK PCB
Hi, I have to use the USB 2.0 on the main PCB, does anyone know the pinouts for these?, its not even clear where they are, is there documentation somewhere?. Thanks in advance!
View ArticleD54250WYKH doesn't recognise Crucial M4 or Samsung 840 Pro SATA SSD
Hi all, This is my second D54250 NUC and this time I went for the 2.5" SATA model so I could use one of the SSD drives I already had. I paid an extra $50 for it. I tried both of my SSD drives and the...
View ArticleDual boot OpenELEC and Android ?
Hello, I have an Intel NUC i3 haswell, i managed to boot android 4.4.2 android-4.4.2_r1-ia1 | 01.org from an usb drive. I want to make a dual boot with OpenELEC and Android on a SSD disk, how can I do...
View ArticleNUC HTPC Sound issues
Hello everyone, Really hoping you can help. I have recently purchased an Intel NUC system (i3, dual HDMI) and while I love the form factor and design I am having issues using this as a HTPC. The...
View ArticleDN2820FYKH Availability
Is it me or is the DN2820FYKH no longer available already? I ordered one two weeks ago and its been listed as 'Your order has been placed with one of our suppliers who will ship it directly to you',...
View Article