Clik here to view.
Intel NUC D54250WYK stereo only with Samsung TV UE55HU7500
I have downloaded the latest drivers but only stereo is supported by my device. I am using HDMI 2.0 cables. I can see there are other people (Re: D54250WYK only 2 ch audio???) with similar issues....
View ArticleIntel NUC D54250WYKH2 BIOS does not detect SSD
Hello,I just received my Intel NUC D54250WYKH2 which I would like to use as XBMC Media Player. Since I already had a 120GB (G.Skill) SSD which I did not need before I wanted to use this in my NUC. So...
View ArticleIntermittent video artifacts with NUC D54250WYK
Hi guys I'm getting occasional video artifacts on a new D54250WYK which I am using as an HTPC. The artifacts always look the same, flashing red/orange dots. I have seen these artifacts occur while...
View ArticleUSB-power stays on when device is off
On my new DN2820FYKH, when the power cord is plugged in, but the device is shut down, the power to my USB-peripherals stays on, which is not desirable for me since I have it hooked up onto an energy...
View Articleusb external hard disks never power off on DN2820FYK
hi,i unplug the power cable from the nuc. i plug it in. i connect an external usb hard disk to any usb ports. after a couple of seconds the hard disk starts spinning, even if the nuc is stil powered...
View ArticleNuc 34010WYK and Win 7 - CIR not working
Hi! First off, the intel NUC is a wonderful little machine, and I enjoy it a lot! However, I am currently struggling to get the built-in Nuvoton CIR to work running Windows 7 Professional 64-bit. I...
View ArticleIntel nuc DC3217IYE will not boot when lightpack is in usb
I just bought lightpack (ambibox from Lab Team). This is s ledlight system that will provide amblight to my tv. When I plug in lightpack to usb and restarts it will not boot. As soon as I pull out the...
View ArticleBUG Report: USB 3.0 eXtensible Host Controller: 2.5.3.34
Further to my post in August copied below I have determined what I believe is a bug in the USB 3 driver. By removing the driver and operating in USB 2.0 mode everything works just fine. I can...
View ArticleNUC DN2820FYKH: WARNING: Processor thermal trip at boot
Hello, When I start my brand new NUC, at startup I have almost always this message: "WARNING: Processor thermal trip" I updated to the latest bios, revert bios settings to default (didn't touch before...
View ArticleD54250WYKH NUC Power button do not light up.
I had recently purchased a D54250WYKH NUC and I have instlled Linux Mint 17 on this machine. I have a Kingston 120GB SSD Msata Drive and Crucial 16GB kit (8GBx2) 204-pin SODIMM DDR3 PC3-12800 memory...
View ArticleClik here to view.
Got issues with BIOS 026 and dual monitors
After updating BIOS from 025 to 026 i got no video at boot with dual monitors attached.Each separate monitor was ok to boot with, and in Windows I could connect the second monitor and everything was...
View ArticleNot able to make use of serial ports on DE3815TYBE
Hi: I need to make use of the serial ports onboard of my NUC DE3815TYBE board, running Linux. I have not been able to do that. In the "Technical Product Specification" is stated that the board have a...
View ArticleDoes the supplied stock 015 BIOS normally detect/show internal HDD & External...
I bought a DN2820FYKY in UK. It arrived late February days before going overseas. All I had time for was to fit a 4GB memory stick and a new Fujitsu SSHD (8GB NAND buffer) type MQ01ABF050H before...
View ArticleD54250 WYB dimension
I bought one D54250WYB motherboard and want DIY the case，so need that dimension date.I know the technical product specification have some date,but not enough.I want get motherboard or D54250wyk case...
View ArticleFails to boot setup installer of Windows 7 Ultimate X64 using UEFI
Has anyone successfully booted to the UEFI installer on the D54250WYK? I'm on the latest 0022 UEFI BIOS. It stops with the Error: FILE: \EFI\Microsoft\Boot\BCD Status: 0x000000d.
View ArticleD54250WYK 'headless' issue?
So I just recently received one of these new machines. Overall I'm impressed but one thing I've noticed is that when no connected display is active - for example if the display port goes into a HDMI...
View ArticleD54250WYK Windows 8.1 low memory error
Hi, I have the D54250WYK with Windows 8.1 and after leaving it on at the desktop doing nothing for a while, I'll get a low memory error.My setup is:Memory is Crucial Ballistix Sport 16GB...
View ArticleClik here to view.
DN2820FYK NUC not detecting SSD
seems like there is alot of problems with NUC not detecting ssd on this board.. so far I have tried Western Digital 500GB, OCZ Agility 3 64BG, Crucial MX100 128GB. And the NUC would not detect any of...
View ArticleWin 7 installation issue on d54250wykh
Hi, My NUC's Configuration:nuc: d54250wykmemory: G.SKILL Ripjaws Series 8GB (2 x 4GB) 204-Pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) Laptop Memory Model F3-1600C9D-8GRSLhard drive: Western Digital Scorpio...
View ArticleGot issues with BIOS 026 and dual monitors
After updating BIOS from 025 to 026 i got no video at boot with dual monitors attached.Each separate monitor was ok to boot with, and in Windows I could connect the second monitor and everything was...
View Article