I'm planning to install PFSense on my Intel NUC, but I read that it only works with Intel Network cards/chipsets. I read several product descriptions and Intel product spec sheet, but the NIC chipset is never mentioned, Could someone here tell me what kind of NIC is built into the NUC?
↧
What is the network card chipset in the Intel NUC5i5RYH
↧
NUC7i7BNH audio jack popping
There are pops and ticks noise when the sound start (NUC7I7BNH, Windows 10 x64, Apple earpods). This noise is very annoying. Sometimes peaks of ticks deafen me.
I think the issue was about the audio card power management but I found nothing in the current Realtek driver Fix for Realtek sound popping and/or high pitched tone/squeal | NotebookReview
Intel, make something, quiclky, PLEASE
↧
↧
Upgrading DN2820FYKH Wi-Fi Card.
Hi guys!
I have a DN2820FYKH with standard wifi mini pcie card (Intel® Wireless-N 7260). Also, I have two Mini pcie cards coming from a Lenovo T420 (Intel® Centrino® Advanced-N 6205) that are compatible with my NUC and are capable to work on 5GHz frequency (https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/nuc-kits/DN2820FYKH_UserGuide02.pdf ). I tried to upgrade it swapping it but, in Windows 10, I install the driver but the card doesn't appears to be available. It shows "Code 10". I tried to update the driver and trying old versions of it (the same that is installed on my T420 laptop) and it stills showing that "code 10". I'm sure that the cards (I have two of them) are working properly because I tried it on the Lenovo and they works. I tried to do a clean installation of Windows 10 with all updates and it stills failing. What do you think guys it's going on?
Many thanks for advance!!!
↧
NUC BHN7i7BHN Optane no boot
My system:- NUC7i7BHN – brand new – updated to latest bios….Bios 52
Hard drive OCZ Agility 3 SSD, 16GB ram.
Operating system windows 10pro.
System without Optane fully operational.
I downloaded the Optane drivers ready to install, installed the Optane card – and managed to boot – into main system (it took quite a long time to boot)all this on Bios 47. I then tried to install the drivers. This threw up an error no RST drivers installed – please uninstall optane and reinstall RST.
I then unistalled via windows – as you would expect to do. Re booted and installed RST – then went to install optane – it would not have it. I then rebooted – and from that point on my NUC will not boot with optane card installed –fineeto. The NUC just stops booting and hangs before NUC bios screen appears. I then updated to the lates Bios – no difference.
I have checked my drive seems to be formatted correctly – and shows GMP partitions etc.
I have tried cleaning windows via the windows clean routeen – no difference.
(I have deleted a full rant - directed at Intel - did see any point pointing it at hpefully a helpful community ;-)
Please help…..and advise if you can fnx
↧
Tamper-evident for NUCs - with timestamp
Hello.
I am looking for a way to upgrade NUCs we use for an appliance with some timestamp-supplying tamper-evident technology. Is there maybe some easy way to do it with an intel NUC? It's simply for opening the case.
↧
↧
NUC7ixBN Screen Flashing (screen turns on and off) when using 4K resolutions
Hi all,
We are aware of this issue and a bug was opened a couple weeks ago. The developers/engineers are working on finding a solution and I will post any updates and/or solutions here.
Thank you for your patience.
↧
NUC6CAYH vs DN2820FYKH
Hi guys,
I have a DN2820FYKH with the cpu 'upgraded' (N2830) and I want to know how better is a NUC6CAYH over my old one NUC. I know is more powerful but does it worth the change?
↧
Can you use any IR remote with a NUC?
Hi all, I am running a NUC6 machine and wanted to see what options are available for setting up IR function with a remote. I have a simple Roku-style remote that I originally used with Flirc. The goal is to be able to map the IR buttons to specific key presses, which subsequently are captured by another program to trigger functions. I looked at the thread linked below, but it's not working for me. Is this no longer possible to do in a gen 6 NUC? Thank you.
↧
NUC Labs in Israel
are there any labs that support Nuc's in Israel?
(i have a D54250WYK and its fan is malfunctioning)
↧
↧
nuc7i5bnh hdmi audio issue
I have a nuc7i5bnh with windows 10 professional. All games with steam don't have hdmi audio: audio output is only by headphones. All other programs works well and have audio output by hdmi. I have all most recent firmware and drivers. What I can do? I test some cable and ports of my amplifier and my tv, I have always the same result.
↧
Unsupported signal. Check device output
New NUC7i7BNH system with 32Gb Optane Memory, 16Gb RAM, 1,5Tb HDD.
I am trying to connect system to Sony Bravia TV via HDMI cable/port.
For first week of using the system I had no problem connecting to TV.
Late last week, following either a Win10 update and/or Intel BIOS update, I have not been able to connect to TV. Now, after POST, I get a black screen with error display - 'Unsupported signal. Check device output.'
I am presuming it is a problem with BIOS as computer doesn't even get to point of loading operating system.
Do I need to roll back to previous BIOS or is their a new BIOS fix?
Thanks,
David Sanderson
↧
How do i reset my NUC5PGYH if i get "problem resetting your PC" ?
I tried to reset my newly bought NUC, Chose remove all files (full clean) and I have an SSD in and chose to remove for both drives (the SSD does not have anything so it should be fine), When it got to 3%, it said "there was a problem resetting your PC. Nothing was changed"
I removed the SSD and tried it again, was able to see 66% and then it went back to "there was a problem resetting your PC"
How do i install the windows 10 back to this NUC?
↧
Audio issues at 4k on NUC7I5BNH
I am having issues with some audio, particularly in games, when my TV is set to 4k@60Hz resolution. I mentioned this in the massive flickering thread and cvare told me to break it out, even though I think this is all related.
Setup: NUC7I5BNH, Vizio m55-C2 4k TV, Audio either through TV or using ARC to Sony XT:HT1 soundbar.
Problem: When I have the resolution set to 4k@60Hz, ifI start a game in full screen mode that is at a different resolution than the desktop, I get no sound. If Windows resolution is set to 1080p in the Intel Graphics Settings, the sound is fine (but I don't want to change settings and reboot every time I want to pay a game). In one of the games, I can select windowed mode and the sound then works. However, when my resolution is set to 4k, it only displays in 1/4 of the screen so there is obviously another problem there. From looking around online, it sounds like others have experienced this before and it might be an HDMI handshake issue or some problem caused when trying to switch to a different resolution.
Games: LEGO Star Wars: The Complete Saga
LEGO Star Wars III: The Clone Wars
LEGO Star Wars: The Force Awakens (this is the one that the audio works in windowed mode but the video is weird)
The LEGO Movie Videogame
So the symptoms are different than with the flickering issues, but it all seems related to HDMI/driver issues. Is this a problem with the LSPCON chips in these NUCs?
↧
↧
NUC BHN7i7BHN Optane no boot
My system:- NUC7i7BHN – brand new – updated to latest bios….Bios 52
Hard drive OCZ Agility 3 SSD, 16GB ram.
Operating system windows 10pro.
System without Optane fully operational.
I downloaded the Optane drivers ready to install, installed the Optane card – and managed to boot – into main system (it took quite a long time to boot)all this on Bios 47. I then tried to install the drivers. This threw up an error no RST drivers installed – please uninstall optane and reinstall RST.
I then unistalled via windows – as you would expect to do. Re booted and installed RST – then went to install optane – it would not have it. I then rebooted – and from that point on my NUC will not boot with optane card installed –fineeto. The NUC just stops booting and hangs before NUC bios screen appears. I then updated to the lates Bios – no difference.
I have checked my drive seems to be formatted correctly – and shows GMP partitions etc.
I have tried cleaning windows via the windows clean routeen – no difference.
(I have deleted a full rant - directed at Intel - did see any point pointing it at hpefully a helpful community ;-)
Please help…..and advise if you can fnx
↧
Upgrading DN2820FYKH Wi-Fi Card.
Hi guys!
I have a DN2820FYKH with standard wifi mini pcie card (Intel® Wireless-N 7260). Also, I have two Mini pcie cards coming from a Lenovo T420 (Intel® Centrino® Advanced-N 6205) that are compatible with my NUC and are capable to work on 5GHz frequency (https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/nuc-kits/DN2820FYKH_UserGuide02.pdf ). I tried to upgrade it swapping it but, in Windows 10, I install the driver but the card doesn't appears to be available. It shows "Code 10". I tried to update the driver and trying old versions of it (the same that is installed on my T420 laptop) and it stills showing that "code 10". I'm sure that the cards (I have two of them) are working properly because I tried it on the Lenovo and they works. I tried to do a clean installation of Windows 10 with all updates and it stills failing. What do you think guys it's going on?
Many thanks for advance!!!
↧
Clear UEFI & Secure Boot
Hi there,
Working with Device Guard on NUC5i5MYBE´s and having a problem clearing UEFI and Secure Boot data after some tests with UEFI lock and signed policies...
The problem is that the NUC is not able to boot from UEFI devices with Secure Boot enabled in the BIOS/Firmware, if I disable Secure Boot everything works in legacy mode (Before the UEFI Lock, everything worked with UEFI and Secure Boot from DVD, USB and PXE boot in UEFI mode.
To reset to NUC i did a BIOS Recovery by the Security Jumper and a USB device with the latest BIOS currently 038, and even after this it seems like there is some information left in the BIOS
In did reproduced this on another NUC with same result, so now I have 2 NUC´s that cannot boot using UEFI Secure Boot
So, any input on how to clear the UEFI, Secure Boot?
Kind Regards
Jesper Hanno
↧
NUC Labs in Israel
are there any labs that support Nuc's in Israel?
(i have a D54250WYK and its fan is malfunctioning)
↧
↧
What is the network card chipset in the Intel NUC5i5RYH
I'm planning to install PFSense on my Intel NUC, but I read that it only works with Intel Network cards/chipsets. I read several product descriptions and Intel product spec sheet, but the NIC chipset is never mentioned, Could someone here tell me what kind of NIC is built into the NUC?
↧
NUC7I5BNK Power ON from Microsoft XBOX 360 Media Remote not working
I am not sure if it is a bug or a missing feature but since it’s announced that this remote is compatible (NUC Ecosystem Catalog July 2017) should work.
Please add support in BIOS or remove from advertised products as compatible.
NOTE: some old NUC’s has this support in BIOS:
However in last generation NUC’s (NUC7I5BNK) this option is missing in BIOS.
Related threads:
NUC7I3BNH IR Power On not working
↧
NUC6CAYS NIC dissapearing
Hello,
I have an issue with multiple NUC6CAYS NUC's.
I have 12 of those running as video playback devices.
Now I started to notice that in seemingly random intervals the NUC's completely lose their ethernet connectivity.
When checking the player it looks like the NIC just disappeared, it is nowhere to be found in the windows device manager or in the network adapter settings.
The only solutions I have found so far is turning off the device for approx. 10min. and restarting it. Normal reboots without the waiting period don't work.
Since these devices are deployed in a professional environment this is not a solution.
Hopefully there will be a solution for this soon.
↧