Hello,
I decided to start a new thread instead of replying to this one Re: DN2820FYKH - Unable to update BIOS
My NUC setup:
1 x INTEL NUC DN2820FYKH Celeron N2820 1xDDR3L SO-DIMM 1xSATA 2.5in (BOXDN2820FYKH0)
1 x Crucial 256GB MX100 2.5" SSD MLC SATA III 550/330MB/s (CT256MX100SSD1)
1 x KINGSTON 4GB 1600MHz DDR3L Non-ECC CL11 (KVR16LS11/4)
I bought DN2820FYKH and tried to install Windows 7 from usb stick.
I downloaded official ISO from Microsoft http://www.techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
Then I created bootable USB stick according to this guide: http://www.techverse.net/how-to-create-a-bootable-usb-pen-drive-for-windows-7/
I also tried two another programs due to the issue I couldn't install Windows 7.
Then I read I have to update BIOS from here: Intel® NUC — Operating System Installation
Every method of updating ends with error, that can be seen in the image. "Flash update fails"
I copied the FY0045.bio file to FAT32 formatted empty USB stick and tried to update by pressing F7 on boot and selecting file, didn't work.
I tried FY0041, FY0025, FY0021, didn't work.
I created bootable USB stick and tried to flash using iflash.exe, didn't work.
I tried updating via Visual BIOS, via direct internet connection, Error about not finding Product ID.
I tried updating via Visual BIOS from USB Stick, didn't work.
I tried updating via BIOS Recovery Update using this guide, didn't work (caused boot loop) Intel® NUC Boards and Kits — BIOS Recovery Update Instructions
And most of those methods I tried with three(!) different USB stick I had...
I really don't know what I can do more, please help me!