Clik here to view.
DCCP847DYE mSATA not recognized after Ubuntu 10.04 install
I have a client's NUC here with an mSATA drive. The drive had worked for quite some time without any issues. I installed Ubuntu 10.04 on the drive, grub2 to /dev/sda mbr, reboot, and all of a sudden...
View ArticleAudio recording device in D54250WYKH
Is there no audio recording device in intel nuc D54250WYK?
View ArticleNUC 340101wyk unable to use the USB 2.0 controller. Need to set USB to eHCI
I have a USB 2.0 eHCI device that is not compatible with a USB 3.0 xHCI controller. I have connected to the USB 2.0 connector on the board, but the device manager still shows that connector on the USB...
View ArticlePoor volume levels from N2820 running Windows 7?
So I mentioned this on another thread in relation to DTS-HD on the same platform, but given that its a different feature set I thought I would post a seperate thread. Running the latest (or any drivers...
View ArticleD54250WYK using second dvb-t device causes usb lockup
I have an intel NUC D54250WYK running latest non-testing arch.linux minikat 3.17.3-1-ARCH #1 SMP PREEMPT Fri Nov 14 23:13:48 CET 2014 x86_64 GNU/LinuxI have two PCTV 290e cards. Both of these work fine...
View ArticleD54250WYK Windows 8.1 low memory error
Hi, I have the D54250WYK with Windows 8.1 and after leaving it on at the desktop doing nothing for a while, I'll get a low memory error.My setup is:Memory is Crucial Ballistix Sport 16GB...
View ArticleD34010WYK USB 3.0 controller broken?
Hi, today I recieved my second NUC and I have same problem with two back USB port - they dont work. I had same problem problem with my first NUC (D43010WYK too), so returned it and they gave me new...
View ArticleClik here to view.
NUC i3 D34010WYK - Cold boot = No display?
Hi All, Just a question about the 4th Gen i3 NUC. When I cold boot – for the very first time after installing the hardware – there is no display. So I then press and hold the power button for 3-5 secs...
View ArticleIntel® NUC DN2820FYKH - XBMC Gotham 13.2 running on Windows 8.1 - issues with...
Intel® NUC DN2820FYKH versus Intel® NUC Kit DCCP847DYEI tested two NUC units to give a good scenario comparisons in the hope that other owners of these two units could benefit from my findings. I would...
View ArticleDE3815TYKE (Atom) Linux reboot freezes box
Dear all, our issue is quite simple: the NUC often hangs and freezes if we want to reboot it.Facts:7 NUCs from three different Shops tested (three different S/N groups)RAM: Kingston KVR16LS11S6/2 2GB...
View ArticleDE3815TYKH will not power down
Hello, I running the DE3815TYKH NUC with Debian Wheezy and kernel 3.14 64bit. The Bios version is 034. If I push the power button the system is halted but will not switch off. So I have to push the...
View ArticleD54250WYKH - display (display port) shuts down unexpectedly after...
I have trouble with sudden loss of display signal/shutdown with use of display port to monitor. The display will never wake up again until you run windows installation again, booted from USB. I can...
View ArticleD34010wyk problems with flash video
Many forms video playback (HTML5, WMP, WMC, XBMC, VLC, etc) work fine on my NUC, but embedded flash video does not. Whenever I try to play embedded flash video on my it runs at a pretty chunky...
View ArticleGraphics won't stay at 60fps; keeps reverting to 59
I have a 54250WYKH with 2 Gb memory, a 256Gb SSD and a 500Gb hard drive installed, running Windows 7 Pro. I use a Samsung 2494HM monitor using the HDMI cable connection. The monitor's native...
View ArticleNUC USB problems
We have three DCCP847DYE NUCs, running our own software package we get comms failures. We updated the BIOS to the latest version and they became SYE NUCs (interesting?!), but we still get comms...
View ArticleClik here to view.
A disk read error occurred - D54250WYK
Hi, I put together an D54250WYK with an Intel SSD 520 120GB, running Windows 8.1. It's around a month old. Ever so often on reboot, it will fail on startup with the text-mode error "A disk read error...
View ArticleD34010WYK USB 3.0 controller broken?
Hi, today I recieved my second NUC and I have same problem with two back USB port - they dont work. I had same problem problem with my first NUC (D43010WYK too), so returned it and they gave me new...
View ArticleWindows 7 stop error after sleep mode for DN2820
My Intel NUC DN2820 sporadically exhibits Windows 7 stop errors (blue screens) shortly (about a minute) after resume from sleep mode.I have already performed memtest86+ for eight cycles without any...
View ArticlePoor volume levels from N2820 running Windows 7?
So I mentioned this on another thread in relation to DTS-HD on the same platform, but given that its a different feature set I thought I would post a seperate thread. Running the latest (or any drivers...
View ArticleNetwork Cable Unplugged
I have an Intel D34010WYK and I have put Windows 7 on it. I am getting the network connection settings saying that the network cable is unplugged.I have installed the most recent drivers for the NUC,...
View Article