D54250WYKH2 does not detect a USB stick
I have purchased the above mentioned item. 8gb ram + a SATA harddrive (this is detected as a bootable drive, but there's not OS on it yet).Made a bootable USB stick with Ubuntu 14.04x64, chose boot...
View ArticleIntel NUC D54250WYKH error "a bootable device has not been detected" after...
I see you have been answering threads regarding Intel NUC issues with detecting the SSD connected to it. I have been searching all over the place but have not been able to find anything definitive on...
View ArticleConnector for integrated antenna broke off!!?
I am having the same problem as countless others on this site. i.e. The UFL wireless antenna connector snapped off while trying to get it un-sheaved. My question is simply "Is this covered under...
View ArticleClik here to view.
unexpected boot order in D54250WYKH after adding mSATA disk to system
I've been running ESXi 5.5 on my NUC for six months now, booted off USB3 key (Leaf Supra) and having its data on a internal spinning laptop drive (WD Red). Today I added a Crucial M550 mSATA drive and...
View ArticleWhen will we see NUC5i5RYH in stores?
Hi I never purchaed a NUC before and not sure what exactly I will need to make it work and hoped someone can help me out here. I was wondering when the NUC5i5RYH is being released and what I will need...
View ArticlePower down USB Ports in S3 sleep mode?
Is there a way to power down the USB Ports in S3 Sleep mode? I'd like to reduce power consumption to a minimum. Wakeup is performe via WOL, so no need at all to keep external USB Devices (like a...
View ArticleNUC i3 4th Gen D34010WYK- Getting the 3 flash memory error with Approved...
So I have a NUC i3 4th Gen D34010WYK, with and Intel 530 mSATA 240 GB drive, and 2 x 2GB of the Samsung recommended module, so it's DDR3L 1600, 1.35v. Issue is that I get the flashing 3 lights of doom...
View ArticleNUC D34010WYK won't turn on via Remote after installing BIOS Update...
After I've installed BIOS Update WYLPT10H.86A.0033, i'm no longer able to Power On my NUC (D34010WYK) with my Logitech Harmony Remote Control.Consumer Infrared is enabled in BIOS, and I can use the...
View Articlenuc d34010wyk dual monitors when only one ..
Hi was hoping someone could help had an issue with my nuc this morning its a new one setup only yesterday windows 8.1 i left it last night all set up how i wanted and was using teamviewer to...
View ArticleIntel NUC DN2820FYKH with Ubuntu 14.10 server doesn't function without a HDMI...
Intel NUC DN2820FYKH with Ubuntu 14.10 server doesn't function without a HDMI monitor and usb keyboard attached. The application I am using it for does not require a monitor and keyboard since it will...
View ArticleClik here to view.
Intel NUC D54250WYK HDMI ARC issue
I have the following setup: Philips 49PUS7809/12 TVPhilips HTL5140 sound barIntel NUC D54250WYK (Windows 8.1 x64) The sound bar is connected to the TV with an HDMI cable and is configured to use HDMI...
View ArticleFix for Static Over HDMI
I recently bought a BOXD54250WYKH1 and was having static noise coming through my speakers. I tried the following-1. Plug HDMI directly into TV2. Change Cables3. Plug directly into wall outlet, not...
View ArticleDriver confusion
Hi all, Anyway I am trying to update some drivers on my NUC (Full Specs below) D34010WYKH (Bios 0033)8GB Corsair Vengeance 1866MHz DDR3L @ 1600MHz128GB SanDisk mSATASeagate 500GB 2.5" HDDIntel Centrino...
View ArticleDN2820FYKH S5 power on LAN adapter
I have a DN2820FYKH with latest Firmware (0048) and openELEC (Linux) operating system. The NUC ist connected via dlan (devolo 650+) to the network. If the NUC is turned on, everything works fine. The...
View ArticleClik here to view.
NUC D54250WYKH SSD not detected issue - Finding and possible solution
I just bought an i5 NUC 2 days ago, 8Gb ram. Tested normal HDD at the shop and everything ok.At home, updated to latest BIOS (WYLPT10H.86A), I tried with my SATA OWC Extreme Pro 6G 240GB SSD, and it...
View ArticleI have a 5425 that I want to leave on...
I'd like to leave my NUC on all of the time so that I can use Teamviewer from wherever I am to access my files and for other reasons. The NUC is behind a Linksys EA series router running the native...
View ArticleClik here to view.
No HDMI signal
I have the Power profile set so that the NUC never goes to sleep, and the monitor turns off after 15 minutes of inactivity. Occasionally, but not always (which of course makes things more difficult),...
View Articled54250wyk cant write to ssd
I recently got a D54250wyk and the SSD samsung 840 pro msata, is visable in the device list but it wont populate in the Boot device list. When I try to install Windows 7 from USB it sees the drive and...
View ArticleNUC D54250WYKH "Ticking sound" when using hdmi to pre-amp - when there's no...
- it starts in a few seconds after pausing or stoping youtube or something else music/sound. Tick-tick every second. Bad or to small PSU? I'd try another hdmi cable. Didn't solve the problem.I'd try...
View ArticleNUC dead after suspend mode
Hello people, I made 2(!) dead NUCs during last year. Every time it happened after my NUC went to sleep (suspend mode).I was not able to switch it on with power button. Only ethernet LED was...
View Article