Clik here to view.
My D54250WYKH makes a ticking noise (not the fan!)
My i5 Haswell NUC, the kind with the extra 2.5" bay, makes a very high-frequency ticking noise whenever I drag a window around the screen and sometimes during video playback. You can hear it and see...
View ArticleIntel NUC D54250WYK HDMI ARC issue
I have the following setup: Philips 49PUS7809/12 TVPhilips HTL5140 sound barIntel NUC D54250WYK (Windows 8.1 x64) The sound bar is connected to the TV with an HDMI cable and is configured to use HDMI...
View ArticleDC3217IYE does not recognize keyboard neither mouse
Hi, Very worried about this problem. The Nuc does not recognize the mouse neither the keyboard (even during the boot), so I am not able to press F2 in the keyboard for BIOS settings. If the NUC does...
View ArticleCan't boot DE3815TYBE headless?
Hello, I have a DE3815TYBE updated to the 7/10/14 bios. I've installed Debian 7.6 to the internal drive and everything works fine when I have a monitor connected via either the HDMI port or the VGA...
View ArticleIntel NUC D54250WYKH not recognizing 2.5 SATA drive (Samsung M9T)
I was actually able to install Windows 8.1 Update 1 on the mSATA drive as the system drive and the second one, at the 2.5" slot was identified on the installation. But then after shutting down once it...
View ArticleCan't enter boot menu/bios
Hi all,I recently installed OpenELEC on my Intel NUC 2820FYKH, yet decided I'd rather work from Windows 7.I created a USB to install from, but now I'm unable to enter any kind of boot menu. Instead,...
View ArticleCan't run DE3815TYKHE headless with Debian?
I have a DE3815TYKHE with the latest v41 BIOS update. I installed Debian 7.6 to the internal drive without any GUI. This is a command line only installation. Everything works fine when I have a...
View ArticleNo options returned with efibootmgr in Debian / Ubuntu on de3815tykhe or...
Hello I am trying to change the boot across a number of de3815tykhe from within linux, usually I can run efibootmgr which brings up a list of boot options that can be adjusted in the EFI NVRAM. When...
View ArticleD54250WYK 'headless' issue?
So I just recently received one of these new machines. Overall I'm impressed but one thing I've noticed is that when no connected display is active - for example if the display port goes into a HDMI...
View ArticleClik here to view.
DN2820FYK - no Display Scaling under Win7
Hi folks. I've just got a DN2820FYK, which after a bit of fuss I got Windows 7 Pro x64 running on. Problem is, my TV's default overscan setting means that a good part of the screen is not visible....
View ArticleProblem to connect wireless keyboard and mouse to the USB3 connections
HelloI have a problem connecting to the wireless keyboard and mouse to the USB3 connectionsDoes the problem is because of the need to connect to USB2? If so how to connect with a cable is recommended...
View ArticleDN2820FYKH use SATA 1.5 instead of SATA 3.
Hi! I got the DN2820, and it uses SATA 1.5GB/s transfer mode instead of SATA 3GB/s, how to I get the NUC to use the full speed?
View Articled54250wyk cant write to ssd
I recently got a D54250wyk and the SSD samsung 840 pro msata, is visable in the device list but it wont populate in the Boot device list. When I try to install Windows 7 from USB it sees the drive and...
View ArticleNUC dead after suspend mode
Hello people, I made 2(!) dead NUCs during last year. Every time it happened after my NUC went to sleep (suspend mode).I was not able to switch it on with power button. Only ethernet LED was...
View ArticleNo HDMI signal
I have the Power profile set so that the NUC never goes to sleep, and the monitor turns off after 15 minutes of inactivity. Occasionally, but not always (which of course makes things more difficult),...
View ArticleDN2820FYKH S5 power on LAN adapter
I have a DN2820FYKH with latest Firmware (0048) and openELEC (Linux) operating system. The NUC ist connected via dlan (devolo 650+) to the network. If the NUC is turned on, everything works fine. The...
View ArticleI have a 5425 that I want to leave on...
I'd like to leave my NUC on all of the time so that I can use Teamviewer from wherever I am to access my files and for other reasons. The NUC is behind a Linksys EA series router running the native...
View ArticleUnable to post from cloned disk
I build DC53427HYE based machines. I always used to clone the original O/S disk using Macrium reflect. It had always worked like a charm until we got new stock in. Now it fails during windows loading...
View Article2560x1440 resolution via mini HDMI port
hiI own an asus vx24ah monitor which has native resolution 2560 1440 at 60hz. the monitor has two hdmi ports and a vga one. will the nuc's mini hdmi port support the monitor's resolution? the only way...
View ArticleDN2820FYKH USB BOOT
Hi, using this NUC with Bios 40 i am not able to boot any OS from USB.I tried openELEC and Ubunto, but the bios don't find any bootable device.I know there was an old bios version which works, but this...
View Article