Problem upgrading NUC5PYH BIOS
I can't upgrade NUC5PYH BIOS to 0044 as I get the message "BIOS Ids don't match". I use IFLASH2 on a FreeDos USB drive. IFLASH2 reads existing BIOS ID O.K. but finds no ID in the BIO file. I have...
View ArticleHelp! Intel NUC5i5RYH Mouse & Keyboard
Do I need a certain mouse and keyboard to work with the 5i5RYH? I just assembled the kit hooked it to the TV and get the initial start screen but both wired and wireless (with dongle) keyboard and...
View ArticlePCIE x4 kyocera or similar connector missing, How to provide pcie x4 feature...
Hello,We recently purchased some units of the Intel NUC model NUC5i3MYHEThese products were purchased to use the internal motherboard where, on intel site and public legal information about, it shows...
View ArticleNUC5i5RYH and SM951
I had my system working fine for 2 days with NUC5i5RYH and Samsung SM951 AHCI M.2 PCIe 128GB. Windows 7 64bit Service Pack 1. Then I decided to upgrade the BIOS to ver. 350 because I hoped it would...
View Articleintel nuc D54250WYK and MiniPCIe SATA Controller
Hi, I have got four D54250WYK nuc'sthere are two nuc's with Revision 302and two nuc's with Revision 303and four Delock 95233 mSATA Controller Windows10 and other (OS independent): Only the two nuc's...
View ArticleNUC 5i5RYH impossible d'installer Windows
Bonjour,Que ce soit sur le M2-SATA ou sur le SSD vides tous deux (Non alloués, partitionnés ou formatés ne change rien) j'ais le message d'erreur "Windows ne peut pas être installé sur ce disque. Le...
View ArticleNUC 5i5RYH not install Windows
Hello,Whether on the M2-SATA or on both empty SSD (Not allocated, partitioned or formatted changes nothing) I board the error message"Windows can not be installed on this disk. The computer hardware...
View ArticleNUC D54250WYKH SSD not detected issue - Finding and possible solution
I just bought an i5 NUC 2 days ago, 8Gb ram. Tested normal HDD at the shop and everything ok.At home, updated to latest BIOS (WYLPT10H.86A), I tried with my SATA OWC Extreme Pro 6G 240GB SSD, and it...
View ArticleNUC5i5RYH Mini Displayport - HDMI 2.0
Hello, I recently bought a NUC5i5RYH and I tried connecting it to my Samsung 55"UHD television by using the Mini Displayport - HDMI (since it would be capable of sending 4K at 60HZ).For two days I have...
View ArticleNUC 340101wyk unable to use the USB 2.0 controller. Need to set USB to eHCI
I have a USB 2.0 eHCI device that is not compatible with a USB 3.0 xHCI controller. I have connected to the USB 2.0 connector on the board, but the device manager still shows that connector on the USB...
View ArticleIs there a way to display BIOS fine on SDTV
visual bios is hardly readableso I made a video to play it back while navigating on tv : https://www.youtube.com/watch?v=JoWhqsTJaeQ&t=214 Btw the video is about Xbmc on tizen as you can notice...
View ArticleNUC D54250WYK DisplayPort - Sleep problem
Hello,I have a problem with NUC D54250WYK properly sleeping and waking up. My NUC is connected to the monitor through DisplayPort. I have the following power settings set on my x64 Windows 10:1....
View ArticleNuc5i7ryh Displayport crash - really annoying
So this thing is really getting on my nerves.. I am currently using an AOC monitor via Mini HDMI to HDMI directly into the screen. Everything works fine this way. However! If I am trying to connect it...
View ArticleHelp! Intel NUC5i5RYH Mouse & Keyboard
Do I need a certain mouse and keyboard to work with the 5i5RYH? I just assembled the kit hooked it to the TV and get the initial start screen but both wired and wireless (with dongle) keyboard and...
View ArticleSMBIOS Serial Number, the ITK and 6th gen NUCs
Hello, I'm trying to get to the bottom of an issue with the 5th generation Intel NUCs. We have a large deployment of Intel NUCs and need to automate the provisioning of the OS using an existing...
View ArticleMini PC - Intel® NUC Board DE3815TYBE
Hi, "Secure UEFI boot issue" I bought a "Mini PC - Intel® NUC Board DE3815TYBE". Both legacy and UEFI boots works fine. When i disable legacy in the BIOS set up. still OK (boots with UEFI). Once I...
View ArticleUSB ports changing with time for connected devices
I have an NUC5i3RYH running Windows 10 Home x64 I seem to be experiencing an issue where there are changes on the USB ports affecting devices attached to them. I have now tried three different USB TV...
View ArticleDN2820FYK - no Display Scaling under Win7
Hi folks. I've just got a DN2820FYK, which after a bit of fuss I got Windows 7 Pro x64 running on. Problem is, my TV's default overscan setting means that a good part of the screen is not visible....
View ArticleNUC5PPYH Pops and annoying sounds at startup
Hello,This is a minor problem, but if it could be solved easily through a BIOS update it would be fine. I have a NUC5PPYH and a stereo amp connected to the analog rear audio output (jack 3.5mm).I'm...
View ArticleNUC5i3RYH and Bluetooth Headset
Hello, I have a NUC5i3RYH with Windows 7 Prof 64 bit and want to use a Bluetooth Headset (Mpow).Connection ok - I can see the Headset and it is connected to the pc but I am not able to use it in any...
View Article