How to power ON/OFF a NUC D54250WYK using a Logitech Harmony 900
Hey guys, As the topic suggests I'm trying to find out how to power ON/OFF my NUC using a Logitech Harmony 900 universal remote control. So far I've been able to power it ON by first finding and adding...
View ArticleHow to connect the D54250WYK to a monitor without wires?
Hi, I am new to this forum, and would like to solicit the community feedback to make the best choice for my use case. I plan to purchase the D54250WYK, and I have budget to purchase a new monitor...
View ArticleNUC Haswell reboots after shutdown
If I chose shut-down it turns off but starts again. How so fix? Ubuntu 13.10. NUC Haswell BIOS version: 0022 (same with 0018). I just found this: Re: D54250WYK Shutdown Rebootsbut the asker didn't...
View ArticleD54250WYKH - maximum resolution for Display Port chaining
Hi, I'm setting up NUC for professional work/light gaming - What is maximum diplay resolution @60Hz for two monitors plugged with DP display chain ? e.g. can I plug two displays like this - Dell...
View ArticleClik here to view.
D3010WYK behavior on power loss
I have a couple d3010wyk boards running windows 7 x86 connected to UPS power supplies. When AC power is disconnected, the UPS shuts down the computer then disconnects power from the computer. At this...
View ArticleDN2820FYKH DTS-HD?
I've setup my 2820 NUC kit, and under supported audio formats in windows 8.1 DTS-HD is not listed. I've installed all the drivers provided in the NUC driver bundle at Download Center , and attempted to...
View ArticleDo I need 2 Memory Modules on my Intel NUC?
Hello. I have an Intel NUC DCCP847DYE. It was the Celeron Processor model. I was wondering if I need 2 memory modules since it had 2 memory slots. Is it fine if I only install 1x 2GB Memory module?
View ArticleD54250WYK facing down
I know that one of the characteristics of the NUC is to be compact. Still, I want to gain space on my desk and screw the D54250WYK beneath a wooden table. - could I use the VESA mount plate to screw it...
View ArticleNUC DN2820FYKH: WARNING: Processor thermal trip at boot
Hello, When I start my brand new NUC, at startup I have almost always this message: "WARNING: Processor thermal trip" I updated to the latest bios, revert bios settings to default (didn't touch before...
View ArticleDC3217IYE Sata problem
Hello, i have the following msata drive installed: crucial 256gb sata 3 After running "as ssd" and "crystaldiskmark", the maximum sequential speed is no more than ~270MB/s. Hdtune is reporting the...
View ArticleHaswell NUC CIR receiver (ACPI issue?)
The D54250WYK infrared receiver is not working out of the box in Linux. I have been testing this in 64bit Ubuntu 13.10 and OpenELEC 3.2.3. The following lines can be found in dmesg:[0.168692] pnp...
View ArticleClik here to view.
Intel® NUC Kit D34010WYK Power Button
The power button on my NUC decided to stop working one day, and I'm not exactly sure why. For me, I use a Harmony 900 remote with a Microsoft IR profile, and the CIR sensor correctly starts up the NUC,...
View ArticleGot issues with BIOS 026 and dual monitors
After updating BIOS from 025 to 026 i got no video at boot with dual monitors attached.Each separate monitor was ok to boot with, and in Windows I could connect the second monitor and everything was...
View ArticleD54250WYK 'headless' issue?
So I just recently received one of these new machines. Overall I'm impressed but one thing I've noticed is that when no connected display is active - for example if the display port goes into a HDMI...
View ArticleClik here to view.
Problem with legacy boot
Hello, I just recently bought a NUC kit (D34010WYK), and I'm having trouble getting it to automatically boot with legacy BIOS. I have upgraded to BIOS upgrade #24 because the fix report looked like it...
View ArticleD34010WYK + USB SoundCard + Netflix Win 8 App + 5.1 Sound = No go
Hi, I recently bought an External USB Sound Card to get optical SPDIF out from my NUC. It works perfekt in Windows Media Center and outputs Dolby Digital, DTS and Dolby Digital Plus to my...
View ArticleD54250WYK Not powering on by MCE remote
I was having an issue powering on the NUC using the power button on top so following information on XBMC forum I removed the CMOS battery for 10 minutes to let the BIOS completely reset to defaults....
View ArticleRemote boots one NUC, and not another
Hi there I'm having a really strange issue with my xbox 360 media remote. It can boot my dn2820 nuc, but NOT my d34010 i3 nuc. The remote DOES work when the OS has loaded, openelec in this case, for...
View ArticleDN2820FYKH won't install Windows 7 from USB
Hi all, I've had Ubuntu installed after some difficulty (mainly with creating a bootable USB on my Macbook) but decided I don't really like using it and would like to use Windows 7 instead as I have a...
View ArticleNeed scheduled wake and/or power-on in BIOS for signage
We're using the NUC for several digital signage setups, but what we really miss is the ability to schedule an automatic wake and/or power-on in the BIOS. From the OS, an auto wake does not always work...
View Article