Clik here to view.
Intel NUC DN2820FYKH
Hi, I got the dn2820fykh with BIOS version 015 installed.I installed Ubuntu 14.04 on the machine and also installed software to be able to remotely connect to the machine.Everything work fine, and the...
View ArticleF2 Entering BIOS
I can allways replicate F2 not working and also F2 that does work.NOTE: I am using HDMI port, not DP (dont know hot this is on DP, since I dont have DP-HDMI conversion cable). In my workplace I have...
View ArticleSystem panel connector for DN2820FYKH
Hi, We need to integrate an Intel NUC DN2820FYKH as a main controller for a robot prototype. To manage correctly the power on / shutdown procedure we need to interface our electronics to the...
View ArticleProblem with Profiles for NUC video drivers on Windows 8
I have had a NUC D34010WYKH for few weeks now. I ran into a Problem: Cannot change back to the default video profile. When I right-click on the desktop and go to [ Graphics Options > Profiles ]...
View ArticleD54250WYK with Dual Monitors
Greetings all, I am having an annoying issue with the D54250WYK and dual monitors via DisplayPort and HDMI. The underlying issue is probably related to another post seen here: D34010WYK crashes when...
View ArticleHow long will the Intel Haswell NUC's be made, sold and supported by Intel?
I am looking for a platform for a new product line and would like to know how long the Intel Haswell NUC's will be manufactured, sold and supported by Intel? Also, will the NUC support a half-height...
View ArticleClik here to view.
Netflix framedrops on nuc34010 win8.1 marantz avr
Hello, I recently bought a nuc d34010 to use as htpc.I updated all the bios/drivers to latest version.When I play Netflix with metro app, Ik will get hd picture and dd+ sound, but every 2 seconds I see...
View ArticleNUC Win 7 / 8 Drive Idle / Standby Problem
Has anyone else experienced problems in getting hard drives to spin down when idle running Win 7 or Win 8 on the NUC platform? I have some NUC DE3815TYK's Bios 0024 that I was hoping to use for an...
View Article2560 x 1440 resolution with the D54250WYK
Hi, The D54250WYK's spec document here states that the MiniHDMI port supports maximum resolution of 1920 x 1200 @ 60 Hz,...
View ArticleDN2820FYKH DTS-HD?
I've setup my 2820 NUC kit, and under supported audio formats in windows 8.1 DTS-HD is not listed. I've installed all the drivers provided in the NUC driver bundle at Download Center , and attempted to...
View ArticleNUC D54250WYKH Firewire via Mini-PCI Express Slot...
I have a legacy audio headphone amplifier that has a Firewire 400 connection, i was wondering if it was possible to use this on my D54250WYKH via the Mini-PCI Express Slot? Here is an eBay listing for...
View ArticleD54250WYK Not powering on by MCE remote
I was having an issue powering on the NUC using the power button on top so following information on XBMC forum I removed the CMOS battery for 10 minutes to let the BIOS completely reset to defaults....
View ArticleCorrect way to update BIOS
I've read a couple of times on this forum that the correct way to update a BIOS is by avoiding jumps between versions, here: https://communities.intel.com/thread/51162and...
View ArticleNUC Haswell reboots after shutdown
If I chose shut-down it turns off but starts again. How so fix? Ubuntu 13.10. NUC Haswell BIOS version: 0022 (same with 0018). I just found this: Re: D54250WYK Shutdown Rebootsbut the asker didn't...
View ArticleClik here to view.
D54250WYK, Samsung U28D590D, 4K-resolution not working
Hi! Just purchased .. Intel NUC D54250WYK (bios 0026 / WYLPT10H.86A & latest drivers from Intel-site)Samsung U28D590D 4K-display (3840x2160 & 60Hz)Fuj:tech DisplayPort - Mini DisplayPort...
View ArticleUnable to boot with Intel NUC 2820 linux kernel > 3.14.5-1-ARCH
Hi Every kernel after 3.14.5-1-ARCH (even the newest 3.15.x release) causes boot problems on my Intel NUC 2820It is not able to boot into the system, not even to the stage where systemd is taking over....
View ArticleSsd write low
Hi My new haswell i5 Nuc is showing realy low write speeds when i benchmark it in nova bench its only 127 mb/s ? And yes ihave enable and disable all for it .Is it noc's sata bord that are that bad...
View ArticleIntel NUC does not recognize Samsung mSATA
I installed Intel NUC D54250WYKH with HDD and Samsung mSATA 840EVO. The HDD works fine but the mSATA is not recognized, even after upgrading to latest BIOS and Windows 7 64bit. The other PCIe device...
View ArticleINTEL NUC DRAWINGS [3D CAD] DE3815TYBE
I am looking to get dimensions for a DE3815TYBE. This includes component heights. Ideally this would be in the form of a 3D CAD file (i.e. step), but any format would do. The only dimensions that are...
View ArticleClik here to view.
Need a model/drawing of D54250WYB board
My company is trying to design NUC chassis. We use SolidWorks (I am an mechanical engineer). Without 3d model of the NUC motherboard it is almost impossible. I try to reverse-model it but it is a road...
View Article