Hello!
Is HDR support in windows 10 creators update supported for this model?
I cant find anything to activate it? In the HD control panel i cant change color depth and so on..
Do we need graphics driver with WDDM 2.2?
Kind reegards
Jake
↧
Intel NUC7i3bnh HDR support
↧
Punto de venta
Hola, soy de lima peru, y necesito saber como puedo adquirir el nuc6i7kyk para poder comercializarlo en mi ciudad, algún contacto que pueda ayudar por favor
↧
↧
Multiple ESRV_SVC_QUEENCREEK errors in event log
Hi folks,
since Sep, 30th I found 50+ error events of this type, always in pairs.
-<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
-<System>
<ProviderName="ESRV_SVC_QUEENCREEK" />
<EventID Qualifiers="16384">2</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreatedSystemTime="2017-10-12T15:01:21.620858900Z" />
<EventRecordID>209</EventRecordID>
<Channel>ESRV_SVC_QUEENCREEK</Channel>
<Computer>NUCLEUS</Computer>
<Security/>
</System>
-<EventData>
<Data>Error [0]: [Invalid Parameter(s).][0x57]. Problem: [--RUN_AS_USER_PROCESS]. Solution: [Unknown Command.]. Occurred: [Thu Oct 12 17:01:21 2017]. In file: [parse_cli.c]. At line: [774].</Data>
</EventData>
</Event>
and
-<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
-<System>
<ProviderName="ESRV_SVC_QUEENCREEK" />
<EventID Qualifiers="16384">2</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreatedSystemTime="2017-10-12T15:01:21.620858900Z" />
<EventRecordID>210</EventRecordID>
<Channel>ESRV_SVC_QUEENCREEK</Channel>
<Computer>NUCLEUS</Computer>
<Security/>
</System>
-<EventData>
<Data>Error [1]: [Invalid Parameter(s).][0x57]. Occurred: [Thu Oct 12 17:01:21 2017]. In file: [driver.c]. At line: [22584].</Data>
</EventData>
</Event>
Does anyone has an idea to fix this?
Regards
Holger
↧
NUC Skull Slow WiFi Download Speeds
The internet speeds to my house are 50 Mbps down/up. I'm getting only around 25-30 Mbps down to my NUC Skull. The upload speeds are in the high 40s as expected. (This is all via WiFi.)
Any ideas what would cause the slower download speeds?
I saw another thread with a similar issue. I've followed some trouble shooting steps advised there:
- I've added the iwlwifi-8000-ucode-25.30.13.0 firmware (even though I have newer drivers).
- I tried updating the BIOS by downloading the KY0050.bio file and following the instructions but the USB drive doesn't show in the BIOS Flash Update tool, only the boot drive.
- The Intel® System Support Utility output is attached.
Model: NUC Skull Canyon NUC6i7KYK
Operating System: Ubuntu 17.04
↧
NUC7i5bnh has no audio on HDMI under Centos 7
I apologize if this is a repeat, I am new to your discussion group.
I have an NUC7i5bnh, which is running Centos 7 and I don't have any sound.
I sometimes get a short pop when I do one of the two speakers.
My NUC goes through an IOGear HDMI KVM switch to an Acer monitor and my speakers are plugged into the monitor.
When I switch to the other PC on the KVM, there is sound.
My next test is to switch the 2 PCs, in case the KVM is bad; but I wanted to get this question out there.
Jonathan
↧
↧
New NUCs capable of passing through Atmos?
I'm trying to figure out if the NUC7i3BNH is capable of passing through an Atmos signal? In the specs of the NUC it reads "7.1 digital". So I'm not quite sure if this includes a 5.1.2 channel for example. My setup consists of a Denon Atmos-Receiver and I want to run Kodi Krypton.
Intel® NUC Kit NUC7i3BNH Specifications
Thanks for your input.
↧
Skull Canyon fails to boot from time to time
I have one of the more annoying issues ever which would simply won't go away.
Some background first:
I'm using a Windows 10 x64 PC with BitLocker encryption backed by TPM.
In every 3-4 COLD boots at the beginning of the day i would get a message from windows at boot time that the TPM is unavailable, and because of that windows could not automatically DE-crypt my drive, and i should use the recovery key instead.
At this point more often than not, i cannot even do that because my keyboard isn't working until i disconnect the usb hub cable, and reconnect it.
At this point there is a simple work-around, to simply press CTRL-ALT-DELETE and perform a warm boot. The next boot ALWAYS work using the TPM which is available at this point. Notice i cannot reproduce the issue using warm boots.
In addition do note that i usually leave the machine completely unplugged for several hours / days to save power.
Sometimes the problem escalates to the point the BCD data is corrupted, and a manual repair is needed. But this is far more rare.
My boot settings are: Fastboot disabled , secureboot enabled, and TPM is active and used for BitLocker.
I'm using the latest available BIOS (49)
↧
NUC6CAYS NIC dissapearing
Hello,
I have an issue with multiple NUC6CAYS NUC's.
I have 12 of those running as video playback devices.
Now I started to notice that in seemingly random intervals the NUC's completely lose their ethernet connectivity.
When checking the player it looks like the NIC just disappeared, it is nowhere to be found in the windows device manager or in the network adapter settings.
The only solutions I have found so far is turning off the device for approx. 10min. and restarting it. Normal reboots without the waiting period don't work.
Since these devices are deployed in a professional environment this is not a solution.
Hopefully there will be a solution for this soon.
↧
INTEL NUCi7 3D MVC ISSUE
Coming from Intel NUC DN2820 I was able to play 3D MVC with Kodi with new Intel Media SDK, I just purchased Intel NUC NUC7i3BNK and 3D playback doesn't work.
On the Intel NUC DN2820, the resolution was set 1920X1080p 3D and everything works great
On the Intel NUC NUC7i3BNK either I set the 1920X1080p 3D or 3820X2160p 3D doesn't work
The Intel Media SDK was supposed to allow 3D MVC to work, I did some testing and found the HDMI 2.0 connection is the one causing the issue and any NUC with HDMI 2.0 doesn't work/
↧
↧
Mouse Lagging NUC7i3 BNH win10
hello, on my new NUC the mouse is lagging, i tested several mouses usb, tested bluetooth
mouse, updatetd drivers so far it works, no positiv result.
Please help, my motherlanguage is german
Thanks a lot best regards
↧
Bluetooth Not Available on this device
I use Windows Troubleshoot check for Bluetooth and it shows Device does not have Bluetooth.
I just bought this NUC6i7KYK it works well until this morning. Search through the net try install new driver and no Bluetooth icon. Try to uninstall driver and re-install it also does not success. Finally try Windows Troubleshoot and it say Device does not have Bluetooth.
Check the Device still find the installed keyboard with the mark that "Bluetooth is turned off"
Please help how I can fix this error.
Best regards,
↧
NUC7i7BNH HDMI stops working, won't work until shut down and power up
I have a NUC7i7bnh configured with Windows 10X64 and the latest drivers and bios packages from Intel.
I have the NUC plugged in with 4K HDMI cable directly to a Marantz receiver that supports 4k. The Marantz then outputs to the TV over 4K HDMI.
For some reason whenever the NUC is left idle and we turn the TV and equipment off and come back to use it again the HDMI signal is gone. The NUC is running, I can remote in to it and it is working fine but it is no longer outputting HDMI and it doesn't detect the Marantz as a video display. If I unplug the 4K HDMI cable from the back of the Marantz and plug back in that will sometimes reset the connection but most of the time not. The NUC is configured to never go to sleep and it is not going to sleep.
I cannot begin to describe how awfully disappointing this product is and how it can't even keep a video signal alive.... We basically have to power off the NUC and power it back and then the NUC will appear on the screen again even though the marantz is set to the correct source the entire time.
There is just no excuse for having HDMI video stop working and having to shut down and power on. By the way a restart does not fix the issue. You have to actually power off the nuc before it will reinitialize the display.
The issue is not my marantz or my TV. Every other component is working perfectly with 4K going through the Marantz.
Please help me with a resolution on this NUC is basically a brick and I will start RMAing it until they give me a refund for wasting me time with a non working product.
leaving the Marantz 7703 turned on and set to the NUC source does not fix the issue either. The NUC clearly stops outputting after a period of time and does not start outputting again until a shut down and power up.
NUC7i7BNH 4K
MARANTZ AVR7703 4K
SONY XBR940D 4K
↧
NUC7i5bnh has no audio on HDMI under Centos 7
I apologize if this is a repeat, I am new to your discussion group.
I have an NUC7i5bnh, which is running Centos 7 and I don't have any sound.
I sometimes get a short pop when I do one of the two speakers.
My NUC goes through an IOGear HDMI KVM switch to an Acer monitor and my speakers are plugged into the monitor.
When I switch to the other PC on the KVM, there is sound.
My next test is to switch the 2 PCs, in case the KVM is bad; but I wanted to get this question out there.
Jonathan
↧
↧
Netflix in UHD what am I missing
I have an intel NUC7i7BNH with 16gb of memory. Which is connected to an LG HDR tv (I can get HRD contect via the smart TV apps and the 4k player)
I have done some research online and found out that the HDMI port on the NUC is hdcp2.2 compliant
(page 25)
From my research online I can confirm that:
- I am running windows 10 with all of the latest updates installed
- I am using the latest graphics drivers from intel
- I have the netflix UHD package (again I have checked via just the app on the tv and it streams in UHD)
- I have set Netfix it via the options to use the best possible picture.
- I am using MS edge as the browser when connecting to netfilx
I just don’t seem to be able to get it to stream in UHD on the PC.
Has anyone managed to get this to work?
D
↧
NUC Skull Slow WiFi Download Speeds
The internet speeds to my house are 50 Mbps down/up. I'm getting only around 25-30 Mbps down to my NUC Skull. The upload speeds are in the high 40s as expected. (This is all via WiFi.)
Any ideas what would cause the slower download speeds?
I saw another thread with a similar issue. I've followed some trouble shooting steps advised there:
- I've added the iwlwifi-8000-ucode-25.30.13.0 firmware (even though I have newer drivers).
- I tried updating the BIOS by downloading the KY0050.bio file and following the instructions but the USB drive doesn't show in the BIOS Flash Update tool, only the boot drive.
- The Intel® System Support Utility output is attached.
Model: NUC Skull Canyon NUC6i7KYK
Operating System: Ubuntu 17.04
↧
Won't install Windows 10 either
I am on evening 7 of my attempt to perform an OS install on a NUC7I5BNH.
I tried (in-vain) to install Windows 7, not I bought Windows Home 64 bit and it does not install either.
I have a 500 GB Sony SSD. The install progresses and then "Windows Install cannot continue.
Do I have a bad NUC?
I am out of ideas.
↧
Can you use any IR remote with a NUC?
Hi all, I am running a NUC6 machine and wanted to see what options are available for setting up IR function with a remote. I have a simple Roku-style remote that I originally used with Flirc. The goal is to be able to map the IR buttons to specific key presses, which subsequently are captured by another program to trigger functions. I looked at the thread linked below, but it's not working for me. Is this no longer possible to do in a gen 6 NUC? Thank you.
↧
↧
Win 10 Install on New NUC gets error
I have a new NUC7i7BNHX1. When I try to install Win 10 using Microsoft USB, I get an error 0x80070570. It says "Windows cannot install requested files. File may be corrupt or missing."
The MS USB thumb drive is straight from MS. Is this a bad USB drive, a USB port problem, or ?
Looking for help.
↧
IR receiver not working on NUC7i3BNK after startup
I have two NUC7i3BNK that both have the same issue of the ITECIR Infrared Receiver not being detected after startup. It seems to only happen when the units are started by turning on their HDMI monitor or by pressing the power button on a RC6 IR remote. If I press the power button on the unit to turn it on or select restart in windows the ITECIR Infrared Receiver shows up in device manager and a IR remote works normally. When the IR decides not to work, scanning for new devices in device manager makes no difference and the ITECIR Infrared Receiver does not show up under HID. Both units are running windows 10 and didn't have the issue when initially installed.
↧
NUC7i7BNH BSOD
Hi , I'm getting blue screen error on windows 10.I got it every day when i turn on my computer.
Here is stop code that i have.
stop code : CRITICAL_PROCESS_DIED
stop code : SYSTEM_SERVICE_EXCEPTION
Is any workaround for fixing this problem ?
Update:
SSD : 1x Samsung SSD 850 EVO (250GB),
Ram : 2x Cruical CT8G4SFD8213 RAM (2x, 8GB, DDR4-2133, SO-DIMM 260 pin)
BIOS Version 0052
Windows Edition: 10 Pro 64-Bit Version 1703
↧