Quantcast
Channel: Intel Communities : Discussion List - Intel® NUC
Viewing all 18668 articles
Browse latest View live
↧

Parts compatibility and replacement motherboard

November 14, 2017, 9:40 am
$
0
0

Hi,

 

Please forgive me if this is obvious or poorly worded - I'm struggling here and am not too tech literate.

 

Some quick background:

 

  • I have a NUC DC3217BY.
  • It's been running fine for about two years but in the past month it started turning off randomly. It progressed to the point where it would barely turn on and would continuously try to boot. I could get it to boot to the BIOS screen but could not get it to open windows.
  • It now does not turn on at all. When I press power it blinks (once every 5 seconds - "power-on circuit might have failed")
  • I opened it up and cleaned the fan but didn't see anything obviously wrong.
  • I've been contact with intel support but I haven't figured out the problem

 

My questions:

 

  • Any idea what is wrong or what could fix it? (I've pretty much resigned that its not fixable but worth a shot)
  • What replacement board could I get so that I can use my components and don't need to buy new ones? Money is tight at the moment and I don't need a ton of processing power. It looks like most of the boards have 2.5" SSD space and not mSATA, right?
    • 120 GB mSATA SSD
    • Asint 1GB DDR3 Memory SO-DIMM 204pin PC3-10600S 1333MHz SSY3128M8-EDJEF
    • Hynix 2GB 2Rx8 PC3-8500S-7-10-F2 Laptop RAM

 

Thanks a ton in advance

↧
Search

NUC6i7KYK unable to boot with Intel Turbo Boost enabled

November 15, 2017, 5:09 am
$
0
0

Hey everyone,

 

I've RMA'd a NUC after having spent way too much time to figure out why it was unable to boot.

I just received a new unit and am facing the same problem, the NUC is unable to boot Win10 when Turbo Boost is enabled in BIOS. If it's disabled everything works as expected.

Latest BIOS update done (0050). Also I seem unable to downgrade to 0041 (was shipped with that BIOS) via Power-Button BIOS Recovery (F4).

 

Is nobody else facing this issue? I can live with Turbo Boost disabled but since it's technically the highend NUC I'm not sure whether I should accept this.

 

Thanks!

↧
↧

Nuc7i dual monitor

November 17, 2017, 2:19 pm
$
0
0

I would love to buy a NUC7i5 but can’t find a list of
multiple USB-C (Display port) to HDMI Cable to select from, I do understand I
can only need and use ONE.  I also see
many post on https://communities.intel.com
about usb-c to HDMI cables that don’t work.
Not going to buy one until I can confirm a cable to buy.  Also, this ONE ISSUE has me researching other
NUC like computer that hopefully have 2 video ports like any combination of
HDMI and DisplayPort.  Also, kind of HATE
the idea of tying up my One Thunderbolt 3 port for an HDMI Cable would have preferred
to give up an USB 3 port for DisplayPort.
I also find the information about this on https://www.intel.com/content/www/us/en/support/articles/000005571/mini-pcs.html
completely inaccurate because it implies you can connect two monitors with
PURELY HDMI Cables and yet the NUC7i5 only have one.  And the link to the  Multiple Display Configuration Wizard completely
has no info on any of the NUC7’s

OR like a number of laptops I have seen have 2 USB-C / Thunderbolt Ports

↧

Intel NUC7i3bnh HDR support

April 21, 2017, 4:16 am
$
0
0

Hello!

 

Is HDR support in windows 10 creators update supported for this model?

 

I cant find anything to activate it? In the HD control panel i cant change color depth and so on..

 

Do we need graphics driver with WDDM 2.2?

 

Kind reegards

Jake

↧

Powerdvd HDR Audio solution

November 25, 2017, 12:34 pm
$
0
0

Hi my fellow NUC friends,

 

I have finally solved the problem with Audio in HDR mode with Powerdvd ultra 17. If you read my previous post you can see that I had audio during the .4664 gfx driver but not with the 4771. When Windows got the fall update and Powerdvd also came with an update, I lost my audio. After that I did not use my NUC so much.

 

Today I was googeling and found this thread:

https://membership.cyberlink.com/forum/posts/list/63950.page;jsessionid=BF5F8A367CA3008F83D9A8FFF91F6061#291871

 

By using the procedure I got my sound back

during HDR mode. Finally!!! I need to mention, I did a full reinstallation of Powerdvd before i did this.

 

The directory map is wrong in the link. You need to copy the CLADR-file to this directory:

C:\Program Files (x86)\CyberLink\PowerDVD17\Common\AudioFilter

 

Seems like Intel and Cyberlink are not working togheter on solving this problem. Maybe there is some thread I have not found yet. But since it seems like I am the first to distribute the solution Cyberlink have now about quite a while, I expect Intel will send me a christmas gift. Not only for the solution, but for having a faulty product for almost 9 months. cvare

 

Ps. I did not get the side affects with the volume.

↧
↧

NUC NUC7I5BNH won't power off

October 27, 2017, 3:54 pm
$
0
0

After installing the Windows 10 Fall Update my NUC7I5BNH won't power off unless I press and hold the power button until it turns off (hard off).

 

If I shutdown via Windows it just immediately starts Windows back up. I don't even get to the BIOS/UEFI splash screen.

 

If I press the power button on the front of the NUC the same behavior happens.

 

Video: Intel NUC NUC7I5BNH won't power off - YouTube

↧

NUC6CAYH screen turns black for a second

August 8, 2017, 7:36 am
$
0
0

Hi. I`m having issues with a recently buyed NUC6CAYH. The screen will randomly turn completely black for a second or two. (it happend once every 4 or 5 minutes or once every 4 to 5 seconds)

It has windows 10 Pro installed with latest bios (040) and drivers installed.

It is connected via VGA cable to a LCD display (resolution: 1440x900@60Hz).

The things i`ve tried so far:

  • lowering the display resolution to other than the native display stops the flickering or at least makes it less frequent.
  • I had keyboard, mouse and two printers connected to a back USB port through a 2.0 USB hub. removing the USB hub eliminate de flickering (or at least it has not flicker once in about an hour) [Hub works flawlessly in other PCs]
  • Connecting mouse keyboard and two USB hdds makes the flickering happen at least once every 30 minutes.

 

Thanks in advance and excuse my english.

 

↧

NUC 717BNHX1 Freezes

August 10, 2017, 12:36 pm
$
0
0

Brand new NUC, installed windows 10 and BlueIris software for security cameras.... freezes every ttime after a few hours... the NUC isn't under any stress CPU usage is normal... I need some suggestions .....

↧
Search

cmos time not set

November 19, 2017, 8:36 pm
$
0
0

Hi Intel Forum,

I have just installed a NUC6CAY(H) and receive an error message when booting up "CMOS time not set. Does this mean I need to replace the battery or do I need to reset the time. Please help with both if applicable.

Best regards,

John S

↧
↧

NUC6CAYH screen turns black for a second (VGA)

November 21, 2017, 2:30 pm
$
0
0

Just bought a NUC6CAYH and installed Windows 10 Pro x64 a couple of days ago. A few minutes after Windows Update had installed the Intel graphics driver, the display connected through the NUC's VGA port started to turn black for a second or two every couple of minutes. During the Windows installation and before the box was connected to the Internet (and Windows was able to do updates), the problem did not exist.

To get rid of this annoying behavior, I started to look for updates and flashed the BIOS up to version 41 (from 38) and installed graphics driver 4849, which was just released a couple of days ago. Unfortunately, that did not solve the problem. I started searching this forum and found that many others are having the same problem. As outlined in other threads, this clearly is a Intel Windows driver problem. As others have tried, I installed Linux (Ubuntu 16.04.3) and I am not experiencing this annoying effect under Linux. So please fix this problem in your Windows driver - I specifically picked this box because of its VGA connector in support of my old monitor. It is shocking to me that a company like Intel is not capable to solve a driver problem that has been reported by so many so often for months.

↧

Nuc7i5bnk gigabit lan negotiation fail

November 18, 2017, 9:47 am
$
0
0

I have all the latest bios/drivers installed and noticed my network speed fails to initialize a 1000Mbps connection and uses a fallback to 100Mbps.

(Network driver is version 22.7.1)

 

I have the nuc connected to a gigabit switch which shows the connection speed with its leds ... orange being 100Mbps, green 1000Mbps

When the nuc boots, I see the network come up 3 or 4 times for 1 or 2 seconds in gigabit mode always losing connection (all lights out), then eventually it stays active in 100Mbps mode.

When I go to the properties of the network adapter, I see in the link speed tab, (its set to auto negotiation) current speed is: "100Mbps Full Duplex (EEE: Not Negotiated))"

 

I know gigabit was working before, unfortunately I cannot say what version of the driver was working and when it stopped ...

↧

NUC5CPYH - How configuration Auto Power On with Schedule?

August 3, 2017, 5:25 am
$
0
0

NUC5CPYH - How configuration Auto Power On  with Schedule

 

i has try in menu bios advanced but fail/cannot raunning

 

i configure in bios in here

s5 i check box

date=0

hour=7

minute=0

second=0

 

Pelease solve my problems, Thanks

↧

Is there an automatic power on after a power failure?

November 26, 2017, 10:40 am
$
0
0

Hello.  I want information about the topic I mentioned in the title. Because this is important to me. In the meantime I have to choose one of the NUC6CAYH models as well as NUC5CPYH. Thank you.

↧
↧

Sleep mode. Loud noise from the speakers

November 3, 2017, 11:51 am
$
0
0

Windows 10 Home NUC7i5BNH

There is a problem. :(((

In the sleep mode, loud noise from the speakers. The speakers are connected with USB and audio jack.

↧

[ESXi Can't Shutdown Properly]

November 22, 2017, 8:10 pm
$
0
0

When I shutdown ESXi host which I installed at USB stick can't shutdown properly and shown "Shutdown in progress".
But I can't ping ESXi host IP address and  also can't connect with vsphere client.

 

IMG_1343.JPG

 

IMG_1344.JPG

 

Could someone help me answer about my issue?

Thanks for your value time.

 

*I was installed my ESXi OS at intel nuc7i3bnh.

I would like to know do i need to change some bios setting or is there any problems at intel nuc7i3bnh?

↧
Search

NUC NUC6i5SYH and Ethernet diodes

November 26, 2017, 9:50 pm
$
0
0

Hello everyone,

When my NUC is off I always have a diode of the RJ45 plug that stays on.
I can not find anything in the bios for the disabled.

Do you know if there is a solution?

Thank you

↧

linux display

November 26, 2017, 10:27 pm
$
0
0

when i install linux ubantu that display error when it show the console.

↧
↧

NUC6CAYS NIC dissapearing

October 4, 2017, 12:30 am
$
0
0

Hello,

 

I have an issue with multiple NUC6CAYS NUC's.

I have 12 of those running as video playback devices.

Now I started to notice that in seemingly random intervals the NUC's completely lose their ethernet connectivity.

When checking the player it looks like the NIC just disappeared, it is nowhere to be found in the windows device manager or in the network adapter settings.

The only solutions I have found so far is turning off the device for approx. 10min. and restarting it. Normal reboots without the waiting period don't work.

Since these devices are deployed in a professional environment this is not a solution.

 

Hopefully there will be a solution for this soon.

↧

multi-color LED ring?

March 29, 2017, 2:42 am
$
0
0

I just received my NUC7i3BNH yesterday, and everything is going great, I am in the process of configuring it to replace my existing HTPC laptop.

 

One question, on the presentation page of the NUC, it says: "A multi-color LED ring lets you personalize your NUC with the look you want."

 

The ring i see is always blue, and flashes as would a cpu light, so I am wondering why its described as "personalizable" and "multi-color"

I have searched for explanation about this to no avail

↧

NUC7I7BNH - Which storage disk is best for my use profile?

November 27, 2017, 3:59 am
$
0
0

Hello, I'm migrating my Intel NUC to the third version. I've always used the Intel NUC minipc exclusively as mediacenter, only to see the contents on the Kodi 18 Leia and as shared media server, using the Emby Server. I never use it to surf the internet or use suites as a usual pc.

 

Well, I'm leaving the NUC6i5SYH, with 16GB of RAM and 120GB SSD, which I bought in August 2017 and I understand that it is a great machine, including I'm reviewing it in Brazil.

 

Now I'm leaving for the NUC7i7BNH model (I prefer the higher model because I have more space for an SSD, for cooling and for being easier for resale.

 

This new model I'm buying today will come with 32GB RAM and my question is on the storage disk.

 

I am between the 250GB Samsung 850 PRO SSD and the 250GB M.2 Samsung EVO 960, these from the images below.

 

So, I would like to know from Intel:

 

1. Which is the best option for my use profile and for the template quoted?

 

2. Is this M.2 model absolutely compatible with the NUC model I am getting?

 

Thank you again for your attention.

 

Success and greetings from Brazil.

 

Thanks very much.

 

--------

 

Samsung 850 PRO - 256GB - 2.5-Inch SATA III Internal SSD (MZ-7KE256BW)

 

Product link: https://goo.gl/2MDNvR

ssd850pro.JPG

 

Samsung 960 EVO Series - 250GB PCIe NVMe - M.2 Internal SSD (MZ-V6E250BW)

 

Product link: https://goo.gl/HHW22X

ram32gbnuc.JPG

↧
Viewing all 18668 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>