I am using a Intel NUC7i5DNKE and the installed M.2 Samsung 960 EVO is not available as a bootable device in Uefi-Bios.
↧
NUC7i5DNKE cannot boot from EVO 960
↧
freeze when updating the BIOS Custom BackGround
Hello,
in a BIOS, from a NUC7i5BNH, we have the possiblity to change the background. Great !
In fact, not really...!
- When you are on visual BIOS settings
- and click on Set Custom Background (1024x768, .bmp),
- and select a 1024x768 72 dpi bmp image,
- you click on Open and BAM! screen is freezing.
Impossible to do anything else except ctrl-alt-del....
BIOS version: BNKBL357.86A.0062.2018.0222.1644
If someone have a idea to fix this bug,..
Thank you.
Regard.
↧
↧
Best Option for FAN in a NUC7i5BNH {silent please}
Hello,
when you start for the first time A NUC7i5BNH, the fan is not very quiet.
So the solution is to go the BIOS and set the
Here is my preset. But the processor is average at 60°C, and goes to 92°C when the fan begin to run at his maximum speed...
Is it correct? Someone have better parameter ?
Thank you.
Regard.
↧
BIOS update for NUC7i5BNH causes fan speed settings to be ignored
I have a new NUC7i5BNH and I noticed that the fan ran at constant speed. I found the Cooling page in the BIOS and set it to Quiet - this allowed the fan to slow down and stop when the CPU was not loaded.
I then updated the BIOS - the previous one had a March date, the new one July. With the new BIOS, the fan runs at a constant 3700RPM no matter what I set for the fan mode. I see several other threads reporting the same problem (but was asked to start a new thread). Given that it worked before the BIOS update, it is evidently not a hardware problem and is instead a bug introduced into the BIOS. How can this be escalated to the proper team to fix it?
↧
How noisy is the new NUC8i7HVK / HNK
I cannot find anywhere the idle and max noise in decibels of the new NUC8i7HVK or NUC8i7HNK. Can anybody guide me where to get this data? Tx.
↧
↧
HDMI no signal
hello.
I Have a mini NUC. it used to work fine with BENQ display.
suddenly, when I try to work it says on my desktop HDMI no signal.
I don't understand why and what can I do
thank you for your help
↧
NUC Hades Canyon - worth to wait?
Hi all,
I would like to know if it is worth to wait for the coming NUC Hades Canyon. From specs like the combined Intel Prozessor/AMD gpu it looks like it could do basic video optimization using madvr which is nice.
My question is if old problems with NUCs will be solved in this new generation like:
1.) 3D mvc incompatibility via HDMI 2.0 since it requires HDMI 1.4 and somehow current NUC 2.0 HDMIs have not been downwards compatible (e.g. see thread https://communities.intel.com/thread/112109?start=255&tstart=0 )
2.) HDR support for video playback as well as streaming services like Netflix/Amazon?
3.) With the new processor/gpu combination will players still be able to use 4k hardware acceleration?
NoTechi
↧
[skull/NUC6i7KYK] Fan still working after shutdown
There are some disscussiong, but still no solution.
I'v installed ESXi 6.5 on my NUC skull code name NUC6i7KYK.
CPU fan will still working after I shutdown the system with ESXi's control panel. But, this problem is not happening everytime, without modification of BIOS as well as ESXi's configuration, NUC can shutdown completely occasionally.
↧
unreliable HDMI via SC-HTB15 Sound Bar
I bought a NUC7i5BNH for use as a home theater system. It is connected to a Samsung UE40D5000 via a Panasonic SC-HTB15 Sound Bar. The sound bar has two HDMI inputs and one HDMI output. It can switch between the two inputs and will decode audio streams itself.
My problem now is that the HDMI video output is not working under all circumstances. I can see the boot screen just fine, but once Windows 10 comes up, the TV loses the signal. The Windows installation was done today while connected to a normal monitor, using an evaluation version of Windows 10 Enterprise. I've not installed any specific drivers. I did update the BIOS to the latest (BNKBL357.86A) and also checked that the HDMI firmware is up-to-date (it was, at 1.72 as reported by the update tool).
I only installed Windows because that's the supported OS for the NUC. What I had tried first was Ubuntu Ubuntu 16.04.4 LTS with updated kernel (4.13.0-37-generic) and XFree (xorg-hwe-16.04). There the situation is a bit mixed. The desktop comes up fine. Chromium starts. But loading a web page with images causes the screen to go blank. Killing Chromium brings the display back. In Kodi, the main UI is fine. But as in Chromium, once it the UI contains images, the display goes blank and comes back when returning to a screen without images. Not very useful...
I can avoid all of these issues by connecting the NUC directly to the Samsung TV. But then I lose the ability to do audio decoding in the sound bar.
The HDMI cables have worked flawlessly in this setup with some other, older mini computer.
Any suggestions? I can still return the NUC, but I'd prefer to keep it, because it performs better than my older system.
↧
↧
NUC7i5BNH won't boot from drive
Hello everyone I got a question about my newly bought (1st time ever) NUC. Where I seem to run into problem after problem, okay so first the sytem specs:
Intel NUC 7th gen i5 BNH
M.2 Sata ssd Crucial MX-300 275GB
(Optional for testing purposes) Samsung 850 EVO sata 2.5"
Kingston KVR21S15S8/8 8GB DDR4 SO DIMM 2133mhz , Also tried Corsair Value Select 2x4GB 2133mhz (both got detected in the bios just fine)
When I first got the nuc I installed the corsair sticks and got stuck on the Intel nuc splash screen. After some time it would reboot and say failed post attempts with the led flashing 3 times. So I thought the wrong ram, and ordered the Kingston compatible ram.
Also I could not press f2, f7 or f10 since the keyboard would not respond at all (on all usb ports), changed keyboard aswell and with no luck.
After some testing with the drives installed, the 850 EVO and not the M.2 and vice versa, I left out all the drives, suddenly I could press F2 and get into the bios. So the nuc doesn't seem to be DOA.
Now the problem seems to be whenever a drive is installed the M.2, 850 EVO or a 5400 rpm hdd it won't boot and also I can't get into the bios (keyboard does not respond). If I have only a bootable usb stick it would boot just fine into the OS installer.
What I also tried is updating the bios since it comes with version 60 and I downloaded the 62 on a usb stick but upon selecting it with F7 it gives me a error saying 'error updating capsule' (can't seem to find any info on it on google).
So after hours on google I'm stuck with no options in my mind to try out.
Any suggetions or if this is a common problem? Seems to me it's a legacy boot issue?
↧
Screen sporadically becomes black on Intel NUC (NUC7i5BNH)
Another problem I noticed and which is very annoying is the screen sporadically becomes black for a second on my Intel NUC. It does not seem the graphic driver crashes as there is no error message by Windows and the screen is only black for a second or two – after that all is as before.
- This behaviour only appears when I use both monitors. When I only use Monitor 1 I don't have this problem.
- When I put a YouTube video into fullscreen on Monitor 2 (Google Chrome) the behaviour appears. When I move a Window from Monitor 1 over this fullscreen on Monitor 2 (e. g. Windows Task Manager) the behaviour is no longer present. When I change to fullscreen again so the Windows is minimized the screen sporadically becomes black again. That is very mysterious.
Model: NUC7i5BNH (Date of Manufacture: 06/2017), SA J3**** - 305
SSD: Samsung 960 Evo M.2
RAM: 8GB Crucial DDR4-2133 SO-DIMM CL15 Single (CT8G4SFD8213)
Monitor 1: Dell P2715Q (3840x2160), DisplayPort over USB-C
Monitor 2: Dell U2715H (2560x1140), HDMI
Drivers: Up to date. I use BIOS version 0062.
↧
No audio via HDMI on my NUC7CJYH (Windows 10 Pro)
Did update all drivers on NUC7CJYH, but was unable to get the audio working via the HDMI.
↧
Intel NUC7i TB3/USB-C Port Still Powered After Shutdown/Hibernate
When the computer is shutdown or hibernated, the USB-C/TB3 port is still powered.
In BIOS I turned off USB Power for Yellow port, and enabled Deep S4/S5, but still not resolved.
I have eGPU (Aorus Gaming Box) connected to TB3, and the fan keeps on even after shutdown. I have to unplug the NUC and the fan would then stop.
↧
↧
Nuc5i5RYH display issues?
My Nuc5i5RYH has a visible distorted line 1/3 of the way down the screen and becomes more dramatic during fast action scenes. Any suggestions please?
↧
What is the definitive answer on HDR for NUC7CJYH ?
I see two different answers on HDR support for the new Gemini Lake NUCs. One Intel rep says it will have support, another says it will not. Intel marketing materials say the NUCs support HDR.
So which is it? Is this support coming or will it not be supported?
↧
Support for Kingston HyperX HX424S14IB/4
Hi,
According to nucblog.net's review (link) NUC7CJYH (and likely NUC7PJYH) don't appear to work with Kingston HyperX HX424S14IB/4 (2400 MHz CL14-14-14) memory in dual channel mode. Apparently, the system simply won't boot with both sticks installed. This memory has specifications and an arrangement that "should" be supported by this NUC. It should also be mentioned that the slightly lower spec HyperX HX421S13IB/4 (2133 MHz CL13-13-13) works fine in dual channel mode.
This is some rather decent memory, which I have available and was planning to use on the NUC7PJYH, and it would of course be nice if you made it work with these NUC's. Is it possible to look into fixing this incompatibility in a future BIOS/UEFI release?
↧
NUC7i7BNH Displayport on USB-C not detected/Flicker Multiple Display/Power off Monitor/Loses Collage Mode
In reference to https://communities.intel.com/message/472873#472873, i do face similar issues described in the thread , in addition to it, the displays flicker while in operation. i have 3 displays in daisy chain connection, the primary display interface with the NUC via converter USB-C to DP. And i am using Collage mode in graphics, and each time i lose display, the NUC forgets the collage mode and changes to clone mode and i have to change it each time.The converter i use is not of the type validated by Intel, could that be an issues ? When i remove the connector and plug it back, the display get detected or wake up from power off mode. Even though the sleep mode and turn off display setting in windows has been changed to Never, still the display go to power off . Kindly suggest some solution to overcome these issues.
↧
↧
NUC Hades Canyon - worth to wait?
Hi all,
I would like to know if it is worth to wait for the coming NUC Hades Canyon. From specs like the combined Intel Prozessor/AMD gpu it looks like it could do basic video optimization using madvr which is nice.
My question is if old problems with NUCs will be solved in this new generation like:
1.) 3D mvc incompatibility via HDMI 2.0 since it requires HDMI 1.4 and somehow current NUC 2.0 HDMIs have not been downwards compatible (e.g. see thread https://communities.intel.com/thread/112109?start=255&tstart=0 )
2.) HDR support for video playback as well as streaming services like Netflix/Amazon?
3.) With the new processor/gpu combination will players still be able to use 4k hardware acceleration?
NoTechi
↧
After updating the BIOS incorrectly creates a table MSDM utility ITK6.efi
Device NUC6CAYH made 04.05.2017. BIOS 29. Licensed MS DOEM necessary in BIOS (table MSDM) to record the activation key. Use the utility ITK6.EFI - the table is created, the key is written, itk6 shows that everything is OK. The final step, Windows should send proof to the cloud utility OA3TOOL. So oa3tool utility does not find key in table MSDN if all operations are performed on devices with the new BIOS is newer than the version 29. Version 29 all passes, with the newer BIOS table is not created correctly (tried version 45, then 47). Exactly the same thing is happening with devices NUC5CAYx. The support gave nothing, the second month of silent, the only sent me a VB script to see the key in the registry Windows. The problem is not solved until now. To focus on the old BIOS is not suitable, tomorrow may come the device with a new BIOS and then I can't use DOEM activation.
↧
Best Option for FAN in a NUC7i5BNH {silent please}
Hello,
when you start for the first time A NUC7i5BNH, the fan is not very quiet.
So the solution is to go the BIOS and set the parameter of the CPU Fan Header (Cooling).
Here is my preset. But the processor is average at 60°C, and goes to 92°C when the fan begin to run at his maximum speed...
Is it correct? Someone have better parameter ?
Thank you.
Regard.
↧