hello
I have NUC above and my wifi adapter should be able to connect to AC router 5G which it does but only at 802.11n speed which is 300mbps
and the device properties in windows only shows 802.11n channel bandwidth
my router is asus RT-ACRH13
my adapter driver is the latest already 19.60
thanks
intel nuc 715bnh intel sst oed driver failed to initialize
I have the NUC7I7BNH running:
Two primary issues:
Thank you!
I've now run through three boot cycles trying to install the new gfx_win10_64_15.46.4.4771.zip graphics drivers to no avail. Couldn't return my NUC7i5BNH anymore - sadly. So I'm stuck with trying to reduce flicker.
It's failing during writing asterisks under "Installing Driver: Intel(R) Display Audio". A pop-up appears with the cool title 'Error' and message "The setup program failed to install one or more device drivers. Setup will exit."
I've tried installing the graphics driver only through device manager, but that ends with a windows error.
Other drivers are latest - latest BIOS as well.
Anyone else having this issue? I know we've been told the new graphics drivers don't help the flicker and wake-up, but yeah...
What is the use of Intel Serial IO Driver on NUC 6i5 ?
Is there any pin on the NUC mainboard, assigned to the driver of Serial IO UART Host Controller and Serial IO GPIO Host Controller？
Is the any possible to connect Intel NUC and Intel Edison via the Serial IO Driver?
Can I get a demo program (e.g. C# ) to show the usage?
Thanks a lot.
Trying to install Ubuntu on a Intel NUC NUC6CAYH.
Flashed Ubuntu 16.04 (http://people.canonical.com/~platform/snappy/nuc/ubuntu-server-16.04.1-20160817-0.iso ) to an USB drive.
Grub loader appears after start, can choose "Install Ubuntu" - after about 5 minutes the language list appears. Navigating up and down the language list is very slow (it takes about 5 to 10 seconds to select the next entry in the list). After pressing ENTER it takes another 10 seconds to show up the next window.
After several minutes I can choose the keyboard layout, but after the detecting hardware part, nothing else appears.
Any suggestions?
Specs: Win10x64 (build ~Jul.1/'17, fully patched), Drivers all patched up, HDMI->TV->SoundBar (via ARC)
So. ... Why does my sound-settings limit me to 2-channel only? Everything seems legit but it just won't offer higher than 1995 sound quality. It's really ticking me off. Same setup next to the NUC from Xbox One and my SoundBar shows DTS. From NUC, 2-channel. BAH!!!
I've tried:
- uninstalling display driver, reboot, reinstall
- patching HDMI Firmware to February's release
- different cables (all are HDMI2.0 compliant)
- different ports on TV (my TV has a bunch of 30hz ports, and one 60hz)
Has anyone else dealt with this and found a resolution?
My recently purchased NUC6I7KYK4 mini PC has issues with 4K on startup. Mini display port goes to a black screen when a screen item is clicked. HDMI flickers and flashes. I have new cables especially for 4k and the monitor (Acer CB281HK) is brand new. The monitoer starts ok when paired with another computer. The issue vanishes after a few tries at starting the NUC.
I had not realized until reading my first review exactly how much faster the M.2 SSDs are compared to the 2.5" SSDs that use any version of SATA interface. Which of the Intel NUCs support two installed M.2 SSD drives, so that I could mirror the boot device and hopefully minimize impact when one of the two SSDs eventually fails.
It looks like iTCO_wdt won't properly setup a /dev/watchdog device on Intel recent Celeron NUCs (NUC6CAYS).
```
# uname -a
Linux player-ef15 4.11.0-14-generic #20~16.04.1-Ubuntu SMP Wed Aug 9 09:06:22 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 16.04.3 LTS
Release: 16.04
Codename: xenial
```
Modules are properly loaded (but looks like it is not used)
```
# lsmod | grep -e dog -e wdt
iTCO_wdt 16384 0
iTCO_vendor_support 16384 1 iTCO_wdt
```
No device found in kernel.log:
```
Aug 28 18:49:56 player-ef15 kernel: [ 14.192689] iTCO_vendor_support: vendor-support=0
Aug 28 18:49:56 player-ef15 kernel: [ 14.198585] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
```
No device found by the service:
```
# service watchdog status
● watchdog.service - watchdog daemon
Loaded: loaded (/lib/systemd/system/watchdog.service; enabled; vendor preset: enabled)
Active: active (running) since lun. 2017-08-28 18:49:56 CEST; 17s ago
Process: 2763 ExecStart=/bin/sh -c [ $run_watchdog != 1 ] || exec /usr/sbin/watchdog $watchdog_options (code=exited, status=0/SUCCESS)
Process: 2758 ExecStartPre=/bin/sh -c [ -z "${watchdog_module}" ] || [ "${watchdog_module}" = "none" ] || /sbin/modprobe $watchdog_module (code=exited, status=0/SUCCESS)
Main PID: 2768 (watchdog)
Tasks: 1
Memory: 732.0K
CPU: 13ms
CGroup: /system.slice/watchdog.service
└─2768 /usr/sbin/watchdog
août 28 18:49:56 player-ef15 systemd[1]: Started watchdog daemon.
août 28 18:49:56 player-ef15 watchdog[2768]: starting daemon (5.14):
août 28 18:49:56 player-ef15 watchdog[2768]: int=1s realtime=yes sync=no soft=no mla=0 mem=0
août 28 18:49:56 player-ef15 watchdog[2768]: ping: no machine to check
août 28 18:49:56 player-ef15 watchdog[2768]: file: no file to check
août 28 18:49:56 player-ef15 watchdog[2768]: pidfile: no server process to check
août 28 18:49:56 player-ef15 watchdog[2768]: interface: no interface to check
août 28 18:49:56 player-ef15 watchdog[2768]: temperature: no sensors to check
août 28 18:49:56 player-ef15 watchdog[2768]: test=none(0) repair=none(0) alive=/dev/watchdog heartbeat=none to=root no_act=no force=no
août 28 18:49:56 player-ef15 watchdog[2768]: cannot open /dev/watchdog (errno = 2 = 'No such file or directory')
```
So, I have 3 generations of NUC's and the new 7th gen seems to have the original problem as the older ones. I have an onkyo receiver and a panasonic TV.
If the NUC wakes from sleep without the receiver on (and set to that HDMI input), the audio on the NUC going forward will not work until you reboot the system. There is no way to "reactivate" the receiver as the speaker.
This has been a problem with the older generation NUC's and drivers seems to have fixed most of it. Ideally, the audio driver should re-establish the audio link on each wake (instead of just reboot). It negotiates the video fine via HDMI, but the audio is broken
Please fix!!! I have the latest driver, bios, etc...all installed
Anyone else have issues with HDMI signal dropouts? I am losing connection every now and then. I have to remove the cable and then plug it back in. Sometime blowing into the port helps. Weird I know.
Damn annoying.
Hi
I got a NUC7i3BNH, which originally came with BIOS 0036.
My plan is to have VMware ESXi on this box (either 6.0U3 or 6.5).
I saw that there was a BIOS upgrade available, so I updated to BIOS 0042.
But now the system, won't power off, when doing a shutdown of the ESXi software (tested with both ESXi 6.0U3 and 6.5)
I have been in communication with other people with the precise same hardware, and ESXi versions, running BIOS 0036, where the shutdown/power off works.
So I would like to downgrade the BIOS to 0036 again.
But when I try this I just get "Incompatible BIOS Version, Update aborted" using either the F7 option or the IFLASH2 option.
When I try to do a Power Button Menu F4 BIOS Recovery, I just get a blank/black screen, and the system is just on, but nothing happens. Left it there for many hours.
I have also tried the BIOS Security Jumper, but the result is the same as the Power Button Menu F4 BIOS Recovery option.
How do I downgrade the BIOS back to the original 0036?
I was hoping someone could help me. I got my new and beautiful NUC7I3BNH set up but I the only audio option I get is stereo. I have tried different HDMI ports and cables. I have updated the Bios to 51, tried all the video drivers I could find including the stable 4664 and the latest 4771, I've deleted just the audio from device manager, deleted the video from device manager, updated the HDMI firmware, clean installed windows, removed realtec and reinstalled etc etc. I am out of ideas. The hdmi on the back of the nuc is connected to my HDMI 2 on the one connect mini box of my samsung un65ju7100. My samsung 4k blu ray player and xbox one have no problems sending 4k and multiple audio formats when connected the same way. BTW tv has the most recent update to.
Hello!
Is HDR support in windows 10 creators update supported for this model?
I cant find anything to activate it? In the HD control panel i cant change color depth and so on..
Do we need graphics driver with WDDM 2.2?
Kind reegards
Jake
I've now run through three boot cycles trying to install the new gfx_win10_64_15.46.4.4771.zip graphics drivers to no avail. Couldn't return my NUC7i5BNH anymore - sadly. So I'm stuck with trying to reduce flicker.
It's failing during writing asterisks under "Installing Driver: Intel(R) Display Audio". A pop-up appears with the cool title 'Error' and message "The setup program failed to install one or more device drivers. Setup will exit."
I've tried installing the graphics driver only through device manager, but that ends with a windows error.
Other drivers are latest - latest BIOS as well.
Anyone else having this issue? I know we've been told the new graphics drivers don't help the flicker and wake-up, but yeah...
Coming from Intel NUC DN2820 I was able to play 3D MVC with Kodi with new Intel Media SDK, I just purchased Intel NUC NUC7i3BNK and 3D playback doesn't work.
On the Intel NUC DN2820, the resolution was set 1920X1080p 3D and everything works great
On the Intel NUC NUC7i3BNK either I set the 1920X1080p 3D or 3820X2160p 3D doesn't work
The Intel Media SDK was supposed to allow 3D MVC to work, I did some testing and found the HDMI 2.0 connection is the one causing the issue and any NUC with HDMI 2.0 doesn't work/
Hello!
Somebody can prompt, NUC7i3BNK's M.2 does supports Legasy SATA and PCI Express using NVMe logical device interfaces and command sets simultaneous?
In specification indicate that, it's have
Total # of SATA Ports 2
Max # of SATA 6.0 Gb/s Ports 2
If to assume that one of SATA sockets, is additional and the second M.2, it means supports?
Quite good it would be obvious to specify in the specification - Support of the protocol M.2: Legasy SATA/PCI Express using AHCI/PCI Express using NVMe
intel nuc 715bnh intel sst oed driver failed to initialize
I am not sure if it is a bug or a missing feature but since it’s announced that this remote is compatible (NUC Ecosystem Catalog July 2017) should work.
Please add support in BIOS or remove from advertised products as compatible.
NOTE: some old NUC’s has this support in BIOS:
However in last generation NUC’s (NUC7I5BNK) this option is missing in BIOS.
Related threads: