I have a kiosk system I setup and due to the NUC's inability to come out of sleep from my remotes I'm trying ready mode. Problem is even if I disable password on startup, password to resume from sleep or hibernation, when coming out of ready mode it requires me to login again. How do I stop this?
Thanks.
Steve
Hi. I`m having issues with a recently buyed NUC6CAYH. The screen will randomly turn completely black for a second or two. (it happend once every 4 or 5 minutes or once every 4 to 5 seconds)
It has windows 10 Pro installed with latest bios (040) and drivers installed.
It is connected via VGA cable to a LCD display (resolution: 1440x900@60Hz).
The things i`ve tried so far:
Thanks in advance and excuse my english.
Hi,
Just installed Win 7 Pro on a NUC5CPYH. Installed all the Intel and Windows ugrades bu the SD card reader does not show up. The bios shows the sd drive as disabled but the window is greyed out so I can't click to enable it. Any ideas? The only big change I did to install Win 7 was put in a patch to enable usb 3.0 in win 7. Thanks
Hola, buenos días. Tengo un Intel Nuc7i3BNH. Este es nuevo, y no consigo conectarlo a ningún monitor. He probado con un cable HDMI directo, en otro monitor que no tiene HDMI, sino DisplayPort, he probado con un adaptador HDMI-DisplayPort y nada, además he probado con varios adaptadores para conseguir ver algo en un monitor con VGA y nada. He probado con varios cables HDMI también. No he conseguido visualizar nada todavía. Me gustaría saber que puedo hacer para resolver este problema.
Muchas gracias.
Hello,
I have a NUC6CAYH. Everything works fine: connected to a ASUS Monitor by HDMI/DVI, usb wireless mouse and keyboard and to loudspeakers by 3.5 plug/cinch.
If I turn off the NUC and disconnect the power line I get an extremly loud buzzing from the loudspeakers. I cannot avoid this although I tried a noise filter betweeen the NUC and the loud speakers.
If I keep the power line connected everything is quite.
Does anybody have an idea for a workaround? Is it a failure of the NUC? In general or just mine?
I have so many pc's without any problem of this kind.
Best regards
Gerhard
Hello to All.
This discussion serves as an official bug report submission for the Intel HD Graphics Driver concerning the NUC6CAYH kit.
This issues has been described before by MannT in this NUC6CAYH - Problem with HDMI 60HZ on HD TV question that remained unanswered, since MannT decided to give up on the product.
MannT describes the issue very clearly in his question. If I can add something to his description would be that this "interference" he describes happens every few seconds and becomes utterly annoying after a couple of minutes. This is a total deal-breaker.
The issue is also present using lower resolutions and even higher refresh rates, e.g 1280x1024@75Hz. It seems that irrespective of the resolution if the refresh rate is higher that 50Hz, the issue manifests itself.
I have spent the last 8 days (since I first bought the nuc) trying to troubleshoot this annoying issue and determine whether this is a hardware incompatibility and therefore I needed to return the product, or a software issue that could eventually be resolved.
I have used different HDTVs/Monitors, namely: UE55B7000WW and LT32E310EX. Both exhibit the issue in every different HDMI input of each and using various different HDMI cables including HDMI 2.0 certified cables.
I have updated the BIOS to the latest 0040 firmware. The issue is still there.
I have updated the LSPCON firmware from 1.60 to 1.66. The issue persists.
I have also used different power supplies to power the NUC (12V DC 75Watt Max) with the said issue stil persisting.
I am running windows 10 x64 enterprise and all drivers are up to date and were downloaded from intel's website.
EVERY other computer I own can do 1080p @60Hz using the above mentioned HDTVs/monitors without any issues.
The NUC6CAYH is advertised and sold as ABLE to do 1080p @60Hz, hence the workaround of running my refresh rate @50Hz is completely out of the question.
Anyway, as I mentioned I am not here to accept suggestions from people on what to try next. I wasted enough time and I was lucky enough to pinpoint the problem to the Intel Graphics Driver. Therefore, I am here to submit this as an official bug report and hopefully have Intel's engineers reproduce, acknowledge and eventually fix the issue in one of the upcoming driver releases.
My NUC remains issue free when I use Graphics Drivers up to and including 21.20.16.4590.
As soon as I update to any newer drivers (starting from 4627 up to and including the latest 4729) the issue appears. I did not bother to test 4614 as it was a beta driver and I was not interested in using a beta driver anyway. So I do not know if 4614 has this issue or not.
In case Intel refuses to acknowledge this issue as a graphics driver bug, I would like to know ASAP and in writing as I want to return this product as defective and not get charged any restocking fees etc. I am happy with the unit as far as everything else is concerned, but there is no way that I am going to keep it either using an outdated driver or at a lower refresh rate than what the product was advertised and sold as. I am sure that Intel will choose to stand by its products and not lose another customer as happened already with MannT.
If Intel has another process in place for submitting driver's bugs, I'd be happy to follow it as soon as you let me know about it.
Please do not close this discussion unless an official acknowledgement or denial of the issue as a driver bug is given by Intel.
Looking forward to a very prompt resolution of this problem.
Regards,
KP.
Coming from Intel NUC DN2820 I was able to play 3D MVC with Kodi with new Intel Media SDK, I just purchased Intel NUC NUC7i3BNK and 3D playback doesn't work.
On the Intel NUC DN2820, the resolution was set 1920X1080p 3D and everything works great
On the Intel NUC NUC7i3BNK either I set the 1920X1080p 3D or 3820X2160p 3D doesn't work
The Intel Media SDK was supposed to allow 3D MVC to work, I did some testing and found the HDMI 2.0 connection is the one causing the issue and any NUC with HDMI 2.0 doesn't work/
I am getting annoying screen flickering after installing latest graphics driver x.x.x.4771 on Intel NUC7i3BNH.
Screen flickering goes away if I install older graphics driver. Monitor attached is only 1680x1050 resolution.
Anyone else had similar problems with 4771 drivers ?
Hi there,
Unfortunately the combination of my NUC and tv doesn't work properly. HDMI 2.0 Firmware Update tool 1.66 installed.
Following are the details.
Category | Questions | Answers (N/A if not applicable) |
Description | Provide a detailed description of the issue | Turning on the tv, than the NUC, results in the tv not seeing any signal from the NUC connected to either ports HDMI 1 or HDMI 2 on the tv, mentioning "No input detected". The tv does flicker/switch once, noticing the NUC is starting. Neither the boot splash screen, nor the OS desktop is seen. The NUC boots successfully as i can connect to it over the network. Rebooting the NUC up to 10 times eventually results in showing the boot splash screen and the OS desktop. The VGA connection plugged into another display does not seem to have any problems. Re-plugging the HDMI cable has no effect, tv flickers/switches once but eventually will show "No Input detected". No connection/display issues at all with a satellite set top box connected to the same tv. |
Please place an X to the right of the option showing how often you see this issue using specific steps. (Ex: 'Every few times a game is started it flickers.' <- This would be "Often") | Always (100%): X Often (51-99%): Sporadic (20-50%): Very Sporadic (<20%): | |
Hardware (HW) | Brand and Model of the system. | Intel NUC6CAYH |
Hybrid or switchable graphics system? | - | |
Make and model of any Displays that are used to see the issue (see note2 below). | EFP. Samsung UE28H4000AW (UE28H4000AWXXN) television, firmware version 1042 | |
How much memory [RAM] in the system (see note2 below). | 8GB. 2 times Kingston KVR16LS11/4, 4GB PC3L. | |
Provide any other hardware needed to replicate the issue. | Tried with 3 different HDMI cables: 1 generic "High speed HDMI cable" 1 generic "High speed HDMI cable with Ethernet" 1 Monster branded "Gold Advanced High Speed HDMI Cable with Ethernet" | |
Hardware Stepping (see note1 below). | - | |
Software (SW) | Operating System version (see note2 below). | Not needed to replicate issue. Windows 10 Home x64. |
VBIOS (video BIOS) version. This can be found in “information page” of CUI (right click on Desktop and select “Graphics Properties”. | Graphics Output Protocol (GOP) version 10.0.1036 | |
Graphics Driver version; for both integrated Intel and 3rd party vendors (see note2 below). | 22.20.16.4771 | |
SW or Apps version used to replicate the issue. | - | |
Configurations | Single display, clone, or extended (see note2 below). | Single display. |
Display resolution & refresh rate setting of each display (see note2 below). | 1366 x 768, 60Hz. | |
AC or DC mode, i.e. is power cable plugged in or not? | Power plugged in. | |
How to repro | Please provide steps to replicate the issue. These steps are very crucial to finding the root cause and fix. |
... |
-----------------
Attached are the diagnostic screen shot and files.
Please advise on how to solve this as the situation isn't workable at the moment.
Regards,
Jeroen.
Message was edited by: J B Fixed form layout.
Hi all,
We are aware of this issue and a bug was opened a couple weeks ago. The developers/engineers are working on finding a solution and I will post any updates and/or solutions here.
Thank you for your patience.
Hi,
Does anyone know if the NUC Skull Canyon supports 4k Daisy Chain 60 Hz?
Im trying to do it, but i could just got 30Hz
Thanks
JapeX
I am trying to enable a NUC DE3815TYBE board for dual display (VGA and HDMI) and it won't work. The main screen will always show up on the VGA monitor and nothing on the HDMI. If I unplug the VGA cable, the main screen will show correctly on the HDMI monitor. The BIOS setting for Primary and Secondary monitor have no effect. I have tried "Extend Display" and "Clone Display" - that makes no difference.
I am running Windows 10 PRO, and have updated the drivers and BIOS to latest versions.
Ant ideas?
I can't seem to get any of my bluebooth devices to work.
I actually tried other devices and I can see them when searching and they will connect but the services do not work.
I am running:
Any help at this point would be appreciated.
hello
I have NUC above and my wifi adapter should be able to connect to AC router 5G which it does but only at 802.11n speed which is 300mbps
and the device properties in windows only shows 802.11n channel bandwidth
my router is asus RT-ACRH13
my adapter driver is the latest already 19.60
thanks
I have a 7i3BNH. All drivers appear to be current but there is no 7.1/5.1 output and I don't see any configuration for this in device manager. Under audio/video inputs and outputs my options are Maranzt -AVR(Intel(R) Diplay Audio, Microphone (Realtek High Definition Audio SST) and Stereo Mix (Realtek High Definition Audio SST.) I was previously using various Minix Android boxes and my Marantz receiver always detected Dolby Digital and DTS coding from them. Any help appreciated.
Regards,
Dan
Hi
Have Debian 9 installed on an NUC6CAYH and having one or two problems that is keeping things from being perfect. This one seems simple and I hope someone will make me feel like a fool with something I am just not seeing, but I am not able to get Wifi working on this unit. I have WICD installed which shows no wifi connections. Rfkill shows nothing switched off. I have installed the iwlwifi firmware and noticed the iwlwifi-3168-22.ucode file in the /lib/firmware directory. Not sure where to go from here. Please enlighten...
Kendew
trying to load win7 on this machine, but as win7 doesn't support usb3 the keyboard and mouse stop working immediately. I thought there was a switch in the latest bios do do that, but I cannot locate one. Any suggestions?
Brand new NUC, installed windows 10 and BlueIris software for security cameras.... freezes every ttime after a few hours... the NUC isn't under any stress CPU usage is normal... I need some suggestions .....
My NUC was submerged in historic Louisiana flood. I let it dry, took apart, cleaned it, and to my surprise it started working. With one exception - the infrared sensor. It is recognized by OS, it just does not receive anything. I can see corrosion damage on sensor. Question: Does anyone know where from to get replacement sensor?
Hello i recently upgraded my bios with the last bios 0050 everything was fine before but now games are crashing ... Or freezing ... And i sometime have 15 frame per second on a game that previously was 60 Fps ... I have a egpu Aorus gaming box 1070gtx everything was fine before that update.
Is there a way to rollback ????
Thanks.
Massimo