Quantcast
Channel: Intel Communities : Discussion List - Intel® NUC
Viewing all 18668 articles
Browse latest View live
↧

fan control NUC6i5 Ubuntu

November 7, 2017, 7:39 am
$
0
0

hello,

 

I got Ubuntu 16.04 installed on my NUC6i5 and it works fine, only the fans are too loud and cannot be detetcted by Ubuntu Software for this seems to be an Intel problem.

 

Now, I got an dualboot system installed - Windows 10 / Ubuntu 16.04 and the curious thing is, that under Windows the fan control of Bios/UEFI works fine-silent after correcting UEFI fan-settings, (newest bios), but does not work under Ubuntu correctly: much too loud!

Also curious: Starting windows immediately after Ubuntu, the fan is yet silent, the CPU seems to be very cold!

 

Please, please, is there a possibility to repair this, eventually by a bios update?

The sound of the fan under Ubuntu is very disturbing!

And I'm using Ubuntu most of the time. The NUC is such a fine computer, he has to get a real chance also for Linux!

 

Also, if anybody has a solution via Ubuntu yet, please let me know!

 

 

 

Thank you for your efforts, I hope to hear from you!

↧
Search

How do I daisy chain 2 thunderbolt hubs?

November 7, 2017, 3:20 pm
$
0
0

I have recently discovered a USB C hub that connects to my Thunderbolt port on the NUC7i7BNH. However it's only got an hdmi port, 2 usb ports and an sd card slot. I can daisy chain it with another hub, but there's no other USB C out on it, so can you daisy chain them together and retain the high power transfers?

↧
↧

Can not enter PIN in Win10 with Remote Keyboard app

November 13, 2017, 3:29 am
$
0
0

Have a nice NUC as a media PC, and after a recent update, I cannot type in my Windows 10 PIN at the login screen using Remote Keyboard app.

 

After booting, the mouse reponds, but when it asks for either a PIN or password, the text box will not accept any input from Remote Keyboard app on my android tablet. Works fine with usb keyboard and mouse. Tried un installing and reinstalling on both NUC and tablet, but still does not work.

 

7I3BNH

 

Suggestions?

↧

I have problem booting an Ubuntu usb to start an installation process

October 14, 2017, 9:31 am
$
0
0

NUC 5i7RYH

Kingston G4 8GB USB created by Standard Ubuntu USB-utility with Ubuntu 17.04

 

The USB is found by BIOS but it won't boot from it.

 

I have tested several BIOS settings and updated BIOS Firmware too.

 

Any ideas?

↧

NUC6i7KYK Bluetooth problems

November 12, 2017, 3:30 am
$
0
0

Good day!

Six months ago I bought NUC6i7KYK and noticed the incorrect work of the bluetooth. At any time (this can be 10 minutes, half an hour, hour or any other), the sound may disappear or start popping, and after a few minutes it appears again. It is absolutely impossible to watch a movie normally or listen to music. During these six months I periodically checked the new drivers and installed them, but the problem was not solved. I had to disable the bluetooth in the BIOS and buy a Chinese usb-module for $4, which works perfectly. But it's not right! I always have a busy USB 3.0 port and a high-speed built-in bluetooth should work correctly, especially since this is a software problem.

I have Win10 1703 x64 and Apple AirPods. I would like to help the company's engineers solve this problem. Maybe you have instructions for this? For example, a debugging program that will write a log to determine the cause of the problem. Thank you for your attention and help!

↧
↧

NUC7i3BNH and Samsung UE55KU6400 HDMI problems

February 5, 2017, 9:42 am
$
0
0

Hi everyone,

I've recently purchased a NUC7i3BNH and after installing memory and SSD I tried to connect to my Samsung UHD TV model UE55KU6400 and only got a black screen, no intel logo, nothing.

 

Then I tried to plug to my older Phillips TV and worked fine, installed Windows 10 and then tried to hot swap the cable to back the samsung and voila! Glorious 3840 x 2160 working just fine.

 

However, if I change source or turn off the TV and try to get back to Windows 10, I get a weird pink screen for a second and then a "No source" message from my Samsung. If i try to reboot the NUC, only blank screen again. The only way to get the screen back to the Samsung, is by doing the hot swap trick with the older phillips.

 

I'm no expert but I've spent the weekend learning about HDMI handshake issues and have tried updating all the drivers, the DEVCON trick and nothing works apart from hot swap. As that is not a practical solution I would like to ask if anyone can help.

 

Thanks!

↧

Which eGPU solution recommanded for NUC6I7KYK ?

November 8, 2017, 7:09 am
$
0
0

Hello,

I have a Intel NUC Core i7 Skull Canyon NUC6I7KYK / RAID 0 mSATA (2x512Go) / 32GB DDR4 / Windows 10 64Bits that works great but limited when it comes to run fluently recent video games.

I've seen that, using eGPU via TBT3 interface, you can have a great solution.

I've seen Razor, Akitio among eGPU solutions. But I would like to know which one is stable / fully tested (bug free).

Any feedbacks would be welcome.

Thanks in advance

regards

↧

ESXi 6:5 install on 7i7BHN: nfs41client failed to load

October 28, 2017, 7:29 pm
$
0
0

Hi there!

 

I'm trying to install ESXi 6.5 on my NUC7i7BHN but it does not recognize the network card. Ubuntu 17 server has the same issue. Anybody can help me with that?

↧
Search

NUC7I7BNH Reboots instead Shutdown on Windows 10

November 9, 2017, 6:57 am
$
0
0

Dear Sirs,

 

I'm having a problem with my NUC7I7BNH, when I want to shutdown from windows 10 it shows me shutting down then the windows logs in again!  If I run the shutdown command from CMD  "shutdown -s -t 1 , the nuc powers off properly.

 

Bios updated to  rev. 0054

All drivers installed from https://downloadcenter.intel.com/product/95065/Intel-NUC-Kit-NUC7i7BNH?_ga=2.117465984.808250409.1510239302-422242310.1509378145

 

My NUC setup:

Windows 10 PRO 64BIT

SAMSUNG 960 EVO M.2 250GB NVMe (SSD) MZ-V6E250BW

2 X Corsair 8GB DDR 4 2133MHz CL15 (CMSO8GX4M1A2133C15)

 

Please Advise.

↧
↧

Improved (quieter) cooling for NUC7i7BNH?

November 12, 2017, 12:15 pm
$
0
0

I have a NUC7i7BNH which is mostly running fine. Only problem is that it seems to be pretty noisy (fan) if CPU gets any load.

Does anyone have any suggestions for either an alternate case (more passive cooling, water cooled?) or a lid mod that adds a (filtered) additional fan (most of the ones I've found are for 6th not 7th gen NUCs) ... happy to do some 3D printing and assembly if anyone has one designed and ready to go (don't feel confident enough to design/create my own from scratch)

↧

NUC7i3BNK screen flickering (1680x1050, 59 or 60hz)

October 20, 2017, 2:50 am
$
0
0

Hi,

 

After purchasing a NUC7i3BNK for my aunt as a desktop replacement (only some light internet and office work) I installed the NUC on my LG IPS277l (1920x1080) via HDMI. No issues so far.

Unfortunately when installing the NUC at my aunt's screen (a Dell professional 2009W 20" screen with DVI-D and VGA connections) on the NUC's HDMI port with a HDMI to DVI cable the screen starts flickering in certain circumstances.

 

After some troubleshooting I noticed it only occurs so far on the 1680x1050 resolution (59 or 60hz doesn't make a difference) which is the recommended resolution for this screen. When setting the monitor to a lower resolution it doesn't occur so far.

I believe after reading the forum topics about screen flickering/dropouts that it is a driver related problem, since on other resolutions everything is ok so cables etc. should be fine.

 

I have already installed the most recent bios (0052) and updated the nuc to all the most recent drivers via the Intel Driver & Support Assistant. Then I tried the recommended older display driver in the main screen flickering topic (4771) and the HDMI 2.0 firmware update, but the flickering is still there.

 

(just to be clear, the screen stays ON all the time, it just glitches so no black screen on/off as reported with some 4k monitors)

 

I have uploaded a video of the problem:

NUC7i3BNK screen flickering - YouTube

 

Hope there is a solution for this problem, thank you in advance for looking into it.

 

Mik

↧

NUC6CAYH screen turns black for a second

August 8, 2017, 7:36 am
$
0
0

Hi. I`m having issues with a recently buyed NUC6CAYH. The screen will randomly turn completely black for a second or two. (it happend once every 4 or 5 minutes or once every 4 to 5 seconds)

It has windows 10 Pro installed with latest bios (040) and drivers installed.

It is connected via VGA cable to a LCD display (resolution: 1440x900@60Hz).

The things i`ve tried so far:

  • lowering the display resolution to other than the native display stops the flickering or at least makes it less frequent.
  • I had keyboard, mouse and two printers connected to a back USB port through a 2.0 USB hub. removing the USB hub eliminate de flickering (or at least it has not flicker once in about an hour) [Hub works flawlessly in other PCs]
  • Connecting mouse keyboard and two USB hdds makes the flickering happen at least once every 30 minutes.

 

Thanks in advance and excuse my english.

 

↧

NUC6CAYH screen flickers /turns black

July 30, 2017, 9:56 am
$
0
0

Hi!

 

I'm having some issues with my brand new NUC6CAYH: The screen will randomly turn completely black for a few seconds.

This happens almost every minute. The NUC is hooked up to a display via VGA (resolution: 1920x1080@60 Hz). I'm not experiencing the same issue when I'm using an HDMI display (different resolution and refresh rate).

 

I have Windows 10 installed with the latest updates. The BIOS version is AYAPLCEL.86A and I applied this HDMI firmware update: Download HDMI 2.0 Firmware Update Tool for Intel® NUC Kit NUC7i3BN, NUC7i5BN, NUC7i7BN, NUC6CAY .

I have also installed the latest graphics drivers (15.46.2.4729) but I got the same problems with the previous drivers.

 

Any workarounds? Thanks in advance!

↧
↧

CANBUS for NUC

November 12, 2017, 5:13 pm
$
0
0

Hi,

does anyone know a way of easily integrating CANBUS communication with a NUC?

Thanks,

Andrew

↧

BIOS update for NUC7i5BNH causes fan speed settings to be ignored

July 31, 2017, 9:26 am
$
0
0

I have a new NUC7i5BNH and I noticed that the fan ran at constant speed. I found the Cooling page in the BIOS and set it to Quiet - this allowed the fan to slow down and stop when the CPU was not loaded.

 

I then updated the BIOS - the previous one had a March date, the new one July. With the new BIOS, the fan runs at a constant 3700RPM no matter what I set for the fan mode. I see several other threads reporting the same problem (but was asked to start a new thread). Given that it worked before the BIOS update, it is evidently not a hardware problem and is instead a bug introduced into the BIOS. How can this be escalated to the proper team to fix it?

↧
Search

NUC7i3BNK - Broken PCM sound from and above 88.2/16 via HDMI

October 14, 2017, 2:35 pm
$
0
0

Hi

 

No issue with DTS_MA (96/24) and with other encoded HD format but sound in case of PCM from and above 88.2/24 is broken more and more as quality is higher and higher.

It is same problem with Direct Sound and WASAPI, with foobar2k and Jriver and Kodi.

I tried latest three Intel Audio Drivers but problem is same.

 

win64_154518.4664.exe

GFX_WIN10_64_15.46.5.4771_BN.zip

GFX_WIN10_64_win64_154702.4815.zip

 

DAC is Pioneer Receiver SC-LX 59 which is working fine from other sources via HDMI too.

OS: Win10pro 1703

 

Update: I have tried over all HDMI port on the receiver. Surprisingly only 4K HDCP2.2 port were effected. I would emphasize that other sources can drive these ports too without issue.

↧

NUC7i5BNK HDR support

November 10, 2017, 1:42 am
$
0
0

I have a Nuc7i5BNK with Iris Plus640 Graphics but the latest driver, 4849 which should enable support for HDR, wont install and says the driver is not supported on my hardware. The Iris Plus640 is listed on on the supported hardware list for this driver on the download site but still wont install.

 

I am still running driver 4815 without any HDR. Should i wait for a specific driver for Nuc?

↧
↧

NUC/Spotify/Cortana(in Spanish)

November 13, 2017, 7:16 pm
$
0
0

I have an audio system with speakers wired at several rooms and I want to connect NUC to my audio amplifier to stream spotify music using cortana in spanish to search/select music easily, preferably without a monitor. Do you think this is possible? Any recommendation?

↧

NUC6i5SYK Windows 10 x86 Drivers

November 13, 2017, 10:00 pm
$
0
0

Hey Everyone

 

I'm chasing x86 drivers for my 6th Gen i5 NUC. I have the display adapters, but I can only find x64 versions of the LAN, WLAN, Sound Card and Chipset packages on the download portal.

 

Could anyone point me in the right direction for these?

 

Cheers

↧

NUC5i5MYBE board Display connection

October 17, 2017, 4:27 am
$
0
0

Hii,

This is Radesh from Bangalore.

 

Recently I have purchased NUC5i5MYBE board for one of my projects.

 

I have to install Ubuntu OS in it but I don't know how do I get my Display Device (Computer Monitor) connected to it.

 

It has got 2 Mini display ports, I tried using a Minidp to VGA adaptor cable and tried to connect the board to my monitor but it didn't work.

 

I am struck with this and not able to proceed furthur.

 

Can you suggest any method to connect my board with my computer monitor.

 

I have attached the Spec sheet of the board for your reference.

 

Thank you in advance.

 

 

Regards,

 

Radesh

↧
Viewing all 18668 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>