Quantcast
Channel: Intel Communities : Discussion List - Intel® NUC
Viewing all 18668 articles
Browse latest View live
↧

Skull Canyon NUC, no HDMI or mini Display port to HDMI?

November 29, 2017, 3:29 pm
$
0
0

So I've been using a Skull Canyon NUC for about a year now, and had it hooked up via a mini display port to DVI adapter to a monitor. I just got a 27" 4K display with HDMI and DisplayPort, but can't seem to manage to get the Skull Canyon NUC to connect either by HDMI or Mini Display Port to HDMI to this monitor.

If I reboot, I do see the monitor via HDMI connection, then it does the boot screen and starts to load windows, and goes completely black and no signal.

In the Intel Iris Graphics Control Panel, it does list the monitor connection via HDMI2, but doesn't display anything for it. In Windows' Display settings, it doesn't show any custom scaling, Resolution, or Orientation options (all just greyed out drop down boxes).

I can get it to display via HDMI to my 1080p monitor just fine... How do I get it to display on a 4K HDMI connection? ugh...

Am I missing something?

Edit: Works fine with Samsung 4K TV...

 

Running Bios 50

Intel Iris Pro 580 Graphics Driver is: 23.20.16.4849 (up to date)

HDMI 2.0 Firmware was applied

 

In Device Manager, it lists the monitor as a "Generic PNP Monitor". I've reached out to the manufacturer if there's a driver .inf I can utilize.

↧
Search

NUC D54250WYK no network link

November 6, 2017, 11:53 pm
$
0
0

I have Intel NUC D54250WYK. I have installed Redhat and Fedora but I cannot get the network communication establish.

Fedora shows the following for "lspci -vv | grep -i ether" :

 

shows the chips set as 'I218-V [8086:1559]

 

In the past I have installed Linux, RHEL on several NUCs. I have always configured BIOS for Legacy mode so that I can kickstart.

In this case since I am having trouble I used "e1000e-3.3.6.tar.gz", I tested installing from a Live CD/USB.

 

I also downloaded the - driver from - Download Intel® Network Adapter Driver for PCIe* Intel® Gigabit Ethernet Network Connections Under Linux*

But nothing is working.

 

During power up I can see the link Green LED on the interface.

Then when I boot into the OS, I loose the link light.

This gives me an indication the driver is not working.

 

I appreciate if someone can give me a great sense of direction.

 

Thanks

↧
↧

Got to say I'm disappointed

December 3, 2017, 7:31 am
$
0
0

Had my little NUC5Y.... (the little family friendly one with Windows pre-installed, Pentium N3700 it says) for over 2 years now. It came with Win10 and made its faults obvious the moment I connected to the internet by demanding a multi-gig update. Its little 32Gig SSD is barely, just barely adequate for Win10, and that single first update nearly maxed out C: , a problem I've had to live with ever since. By now, with nothing but Windows as far as poss on C: ALL browsers (Edge, Chrome, Firefox, even Pale moon!) are slow and eventually demand too much of the poor little thing and hang.

 

And now, it needs another update and is demanding I free 8Gig of space on C:. I have now idea how I can do this. What I really want to do is to reinstall Windows to the much bigger 'proper' drive I installed from new, or at the very least to reinstall Win10 from scratch. How can I go about this? I really think its up to Intel to provide a tool, it's not as if the problem was unforeseen after all.

 

Failing that, Linux suggestions anyone? I'm much better disposed to Linux now see how well my Android phone works, without dragging the dying M$ around with it!

↧

NUC6CAYH slow USB 3.0 ports

December 5, 2017, 4:33 am
$
0
0

I've just bought the NUC so I don't have any previous experiences (benchmarks). I've made all driver updates including latest 42 BIOS. OS is Win10 Pro clean install.

 

One thing I noticed are slow USB ports. I've tried system SSD to USB, USB to SSD, USB to USB, and the max seq write is 40 MB/s.

 

I checked/verified BIOS settings, set Power options to High performance, I even re-checked SSD and USB drives but they work fine and fast.

 

Does anyone have an idea what's wrong? What are your USB speeds?

 

 

Regards,

Thomas

↧

Question NUC6i5SYH / bios 063

November 28, 2017, 11:06 am
$
0
0

Hello,

I have a NUC 6i5SYH
I just set up the latest bios (063)
There has been a change since. At the NUC front there is a blue diode.
With the old bios and at startup this diode was all the time blue.
With the bios 063 at startup it is briefly orange then changes to blue.

Is this normal?

If yes, what does the orange color mean?

 

Thank you

↧
↧

Intel NUC Board NUC7i3DNBE for Embedded solution

December 5, 2017, 3:13 am
$
0
0

Hi,

I want to purchase Intel NUC Board NUC7i3DNBE for Embedded solution.

I want some clarity whether all modules will come from Intel along with board or I have to purchase it separately from 3rd party.

 

Following are my questions:

  1. As board doesn't ship with Wifi, Is Intel provides WiFi module, if asked for?
  2. We required Storage of 100gb or 500gb. Please provide more details about what kind of storage options available on board? Is Intel provides this memory modules if asked for (like HDD or SSD)?
  3. RAM of 32gb is required. Is Intel provides it?
  4. Is Power adapter comes with the board?

 

If anyone has any idea then please guide me on this.

↧

Nuc7i5BNH Updated BIOS, now it's loud.

November 1, 2017, 5:17 pm
$
0
0

I bought a NUC i7 a while back and returned it because the noise was unbearable.  I got the I5 version, thinking it wouldn't get as hot, so the fan wouldn't need to run so much.  It was nice and quiet, but I was having issues getting the HDMI display to wake up after turning on my TV/Receiver...so I updated the BIOS from whatever 04/2017 version it had, to the latest one.  As soon as I turned it booted it up again...same damn noise as the i7....Loud whirring sound, like a jet engine.  Open a web browser...it goes even louder like a hair dryer.

 

Can I roll back my BIOS to what it was??? I did set the fan to quiet, which helps a bit...but I can't sleep with this thing in my room the way it is. 

↧

NUC NUC7I5BNH won't power off

October 27, 2017, 3:54 pm
$
0
0

After installing the Windows 10 Fall Update my NUC7I5BNH won't power off unless I press and hold the power button until it turns off (hard off).

 

If I shutdown via Windows it just immediately starts Windows back up. I don't even get to the BIOS/UEFI splash screen.

 

If I press the power button on the front of the NUC the same behavior happens.

 

Video: Intel NUC NUC7I5BNH won't power off - YouTube

↧
Search

INTEL NUCi7 3D MVC ISSUE

March 7, 2017, 8:35 am
$
0
0

Coming from Intel NUC DN2820 I was able to play 3D MVC with Kodi with new Intel Media SDK, I just purchased Intel NUC NUC7i3BNK and 3D playback doesn't work.

 

On the Intel NUC DN2820, the resolution was set 1920X1080p 3D and everything works great

On the Intel NUC NUC7i3BNK either I set the 1920X1080p 3D or  3820X2160p 3D doesn't work

 

The Intel Media SDK was supposed to allow 3D MVC to work, I did some testing and found the HDMI 2.0 connection is the one causing the issue and any NUC with HDMI 2.0 doesn't work/

↧
↧

No Disply

December 7, 2017, 7:57 pm
$
0
0

I had intel NUC Kit D34010WYKH  last two day not on I press on switch , when I plug and on power supply get green light back to board near on off switch of NUC but not ON or not get display .what problem and how to solve it

↧

NUC7i7BNH screen black/blank once Win10 enters GUI.

December 7, 2017, 9:10 pm
$
0
0

I didn't notice until this week because I was connecting to the NUC via Teamviewer rather than viewing its HDMI output.

 

I noticed that the HDMI display was black.  If the device is rebooted, the 10 year old Sony Bravia that it is connected to the NUC shows the Intel Logo and the spinning animation indicating Windows is trying to load but then before it gets into the GUI the screen signal is lost. 

 

I connected the NUC to my PC's monitor (a 4 year old 27" Dell) and again got no signal except for while it is booting.

 

I then connected the NUC to a third monitor (a newish monitor) and got the desktop. 

 

Since around the time the fall update was installed, the NUC instead of outputting 1920x1080 at 60P was outputting at 59P.  If I changed the output to interlaced at 1920x1080 then I could view the output on the Bravia and the Dell. 

 

To reiterate the NUC was fine displaying on the Bravia and Dell at 60P from September up untill recently.

 

Has the fall update changed the timings of the Video adaptor somehow?

 

I would love for this device to be able to output to 60P again.  Its primary and secondary functions (Minecraft server and web server) were fine headless but for the media server duties that was best performed connected to the 46" TV.

 

Are there any solutions yet?

 

cheers,

voigtstr

↧

NUC6CAYH screen turns black for a second

August 8, 2017, 7:36 am
$
0
0

Hi. I`m having issues with a recently buyed NUC6CAYH. The screen will randomly turn completely black for a second or two. (it happend once every 4 or 5 minutes or once every 4 to 5 seconds)

It has windows 10 Pro installed with latest bios (040) and drivers installed.

It is connected via VGA cable to a LCD display (resolution: 1440x900@60Hz).

The things i`ve tried so far:

  • lowering the display resolution to other than the native display stops the flickering or at least makes it less frequent.
  • I had keyboard, mouse and two printers connected to a back USB port through a 2.0 USB hub. removing the USB hub eliminate de flickering (or at least it has not flicker once in about an hour) [Hub works flawlessly in other PCs]
  • Connecting mouse keyboard and two USB hdds makes the flickering happen at least once every 30 minutes.

 

Thanks in advance and excuse my english.

 

↧

NUC7I3BNK: Crucial MX300 275GB SATA M.2 SSD not recognized

December 8, 2017, 3:10 am
$
0
0

Bought an Intel NUC7I3BNK and a Crucial MX300 275GB SATA M.2 2280SS SSD.

Although it is listed as compatible at Crucial MX300 Interne SSD 275 GB M.2 2280SS CT9857401 | NUC7i3BNK | Crucial DE  , the SSD is not recognized in the BIOS.

 

Already updated the BIOS to the latest version 0057. Details from BIOS setup:

- Advanced -> Devices -> SATA : SATA is active. SATA Port shows "[Not Installed]"

- Advanced -> Devices -> PCI : M.2 Slot is active. M.2 Slot shows "Not Populated"

 

I have no other M.2 SSD available to test if the problem is related to the SSD or to the NUC.

 

Any suggestions?

 

Thanks in advance.

Dirk

↧
↧

Got to say I'm disappointed

December 3, 2017, 7:31 am
$
0
0

Had my little NUC5Y.... (the little family friendly one with Windows pre-installed, Pentium N3700 it says) for over 2 years now. It came with Win10 and made its faults obvious the moment I connected to the internet by demanding a multi-gig update. Its little 32Gig SSD is barely, just barely adequate for Win10, and that single first update nearly maxed out C: , a problem I've had to live with ever since. By now, with nothing but Windows as far as poss on C: ALL browsers (Edge, Chrome, Firefox, even Pale moon!) are slow and eventually demand too much of the poor little thing and hang.

 

And now, it needs another update and is demanding I free 8Gig of space on C:. I have now idea how I can do this. What I really want to do is to reinstall Windows to the much bigger 'proper' drive I installed from new, or at the very least to reinstall Win10 from scratch. How can I go about this? I really think its up to Intel to provide a tool, it's not as if the problem was unforeseen after all.

 

Failing that, Linux suggestions anyone? I'm much better disposed to Linux now see how well my Android phone works, without dragging the dying M$ around with it!

↧

NUC6CAYH stopped booting after upgrading BIOS to v42

December 6, 2017, 8:46 am
$
0
0

Hi!

Another problem with my NUC6CAYH. After upgrading BIOS to v42, PC stopped booting. Recovery procedures for bios are not available. I tried to use both power button menu and security jumper methods. Any ideas?

↧
Search

NUC7i5DNBE CON4003 and CON4004 definitions

December 8, 2017, 7:52 am
$
0
0

What are the function/pin definitions for NUC7i5DNBE CON4003 and CON4004 connectors?

These do not appear in the documentation.

 

Thanks,

 

Harry

↧

NUC7I3BNH boot from micro sd reader others OS

May 11, 2017, 12:36 pm
$
0
0

Hi everybody

I just bought nuc 7i3bnh and I´d would like boot with a micro sd card samsung EVO 16gb HC I

i have tested BIOS options refer to boot without succesful. With usb pendrive I installed win 10 pro selecting F10 key

Anybody can help me with bios parameters?

My target is boot with openelec or librelec also

 

Thank in advance

↧
↧

Nuc startup problem

December 8, 2017, 9:52 am
$
0
0

Hi guys.

 

I hope someone can help me. My nuc 7i5 has worked with no problems so far. But all of a sudden when I try to start it up. The screen looks very weird. It shows the boot screen normally, but when it boots to Windows the screen Is split in half vertically. Bottom half is black and the top half is pixeled in coulour. Can't get further from there. Tried the HDMI cable in my Xbox with no issues.

Windows recently updated. Could it be a graphics driver and how do I fix it.

↧

controladora simple de comunicaciones

December 8, 2017, 4:43 am
$
0
0

En el Administrador de dispositivos me aparecen tres dispositivos sin instalar controladora simple de comunicaciones dispositivo PCI no consigo averiguar de qué drivers se trata ni a que corresponden. Intel nuc6cayh

↧

NUC6CAYH: First screen flickering with HDMI, now USB 3.0 ports do only USB 2.0 speed !

December 8, 2017, 10:12 am
$
0
0

Hi Intel,

 

this is frustrating. When i bought the little one in April, all was running smooth until i started updating the BIOS and other drivers about 6 weeks ago. With the firmware that was originaly on, Windows 10 Pro was running fine with no issues. About 6 weeks ago, after i got the, then latest updates, i also noticed that screen flickering that seems to appear randomly (connected to my ASUS VN279QLB monitor over HDMI). Then, about 2 weeks ago, i did another update and that appears to have crippled the speed of the USB 3.0 ports. With my USB 3.0 sticks and external HDDs i always got betweens 130-175 MB/sec downloading. Now they all MAX OUT at 38 MB/sec. I unplugged all cables, put them all back in again, reboots, loading defaults in BIOS, Windows 10 Pro and the NUC all have the latest updates. But USB 3.0 speed IS GONE !! Only question i have. Is Intel aware of such USB issue ? Or is my NUC toasted for some reason and i should send it back? 

 

Cheers ... hoping for an helpfull answer

↧
Viewing all 18668 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>